Board Microcontroller

Sort By:
  • Cubieboard 2 Kit
    INTRODUCTION Cubieboard2 (ARM® Cortex™-A7 Dual-Core), a upgrade of current cubieboard, is ready to ship now.   Cubieboard2 is based on Allwinner A20 SoC, small size , hacker friendly, extendable and very low-cost.It is an alternative to the Raspberry Pi or pcDuino. Compare with Raspberry Pi, it has higher performance, SATA supported and 96 extended interface.    Compared with cubieboard,just replacing one chip(well, the most important one),cubieboard2 are upgraded from a single core to a dual core and twice gpu performance, and even no change is needed on the PCB. So all the base boards, accessories that works with cubieboard will also fit in with cubieboard2.   On the soft..
  • DFRduino MEGA ADK (Arduino Compatible)
    INTRODUCTION The DFRduino Mega ADK is a microcontroller board based on the ATmega2560, which is fully compatible with Google's ADK and it includes all the basics you need to start building your own Android accessories.   It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button.   Similar to the Mega 2560 and Uno, it features an Atmega8U2 programmed as a USB-to-serial converter.   The Android 3.1 platform (also backported to Android 2.3.4) introduces Android Open Accessory sup..
  • DFRobot CurieNano - A mini Genuino/Arduino 101 Board
    DFRobot CurieNano - A mini Genuino/Arduino 101 Board INTRODUCTION   The DFRobot CurieNano is a small development board based on the Intel® Curie™ module. It is easy to use and perfectly compatible with the Genuino / Arduino 101. The small size will fit your project's development and creation that size matters and makes it ideal for wearable tech and small prototypes.   This CurieNano is perfect for gesture control, other than curie's build-in 6 axis sensors, the DFRobot CurieNano has added a 3 axis Compass module which make the total sensors up to 9 axis.  Together with Curie's neuron SDK, you can easily let CurieNano to  learn gesture by deep learning neurons.  It is the most powerful board to develop ..
  • Dreamer Nano V4.1 (Arduino Leonardo Compatible)
    INTRODUCTION The Dreamer Nano V4 is a surface mount breadboard embedded version of the ATMEGA 32U4 with integrated Micro USB. It has everything that Arduino Leonardo has (electrically).Physically, it is just missing power jack to save space.   Using the ATmega32U4 as its sole microcontroller allows it to be cheaper and simpler. Also, because the 32U4 is handling the USB directly, code libraries are available which allow the board to emulate a computer keyboard, mouse, and more using the USB-HID protocol!   The Dreamer Nano v4 is compatible with most Nano shield in the market. It's suitable for projects that require a compact size controller system.    N..
  • GMR - General Mobile Robot controller (GMR V1.3)
    INTRODUCTION     GMR is the abbreviation of General Mobile Robot controller. It's an integrated circuit board specifically designed for home robot platforms, such as HCR (Home Care Robot).   In this integrated version of GMR, you will need three microncontrollers (MCUs): two Arduino Nano / Dream Nano and one Arduino Mega /Arduino Mega ADK, wherein one Nano works as motor control and data acquisition, and the other one as the ultrasonic sensor driver. The Arduino Mega /Mega ADK works as the main controller board to collect and transimit data as well as to drive other expansion modules, there is also a micro sd card slot for Mega ADK. There are two extra wireless communication plots that can be plugged with Xbee, Bluetoo..
  • WiDo - Open Source IoT Node (Arduino Compatible)
    WiDo - Open Source IoT Node (Arduino Compatible) SPECIFICATION Power Supply range: 5v or 7-12v Arduino Leonardo Compatible Integrate with WG1300 WIFI chip and support 2.4GHz IEEE 802.11 b/g network WIFi and MicroSD driven by SPI port On board 2.4G PCB Antenna Driver pins WIFI Module-D7(IRQ),D5(VBAT),D10(CS),D14(MISO),D15(SCK),D16(MOSI) MicroSD-D4(CS),D14(MISO),D15(SCK),D16(MOSI) User friendly Reset button Dimension: 72 mm x 55 mm DOCUMENTS Wiki Doc Arduino library Github Schematic WiDo with Ubidots   ..