Categories

MECHANICAL

Sort By:
Show:
  • 150 MM ELECTRICAL CUTTER
    New Revolutionary Design, Multiplies The Force Exerted On The Handles For Strengthened Grip & Easy Cut On The Cutter Head. ..
    S$8.00
  • 150MM VERNIER CALIPER WITH WOODER BOX
    Instructions on use The Vernier caliper is an extremely precise measuring instrument; the reading error is 1/20 mm = 0.05 mm. Close the jaws lightly on the object to be measured. If you are measuring something with a round cross section, make sure that the axis of the object is perpendicular to the caliper. This is necessary to ensure that you are measuring the full diameter and not merely a chord. Ignore the top scale, which is calibrated in inches. Use the bottom scale, which is in metric units. Notice that there is a fixed scale and a sliding scale. The boldface numbers on the fixed scale are centimeters. The tick marks on the fixed scale between the boldface numbers are millimeters. There are ten tick marks on the sliding scale..
    S$12.00
  • 5mm Aluminum Timing Pulley For 3D Printer (2 pcs)
    5mm Aluminum Timing Pulley For 3D Printer (2 Pcs) INTRODUCTION     This is an 20 tooth timing pulley with a center diameter of 5mm (0.2"), this is a good fit for mounting on common stepper motors. These pullies are great for many mechanical projects. They are also commonly used in 3D printers.        SPECIFICATION     Teeth: 20 Inner diameter: 5mm(0.2") Teeth diameter: 12.5mm (0.49") Teeth Width: 6.8mm (0.27") Outer diameter: 15 mm (0.59") Fastening screws: M3 x2     SHIPPING LIST     5mm Aluminum Timing Pulley For 3D Printer x2 M4 embedded screw  ..
    S$13.80
  • Hybrid Stepper Motor for 3D Printer (3.5kg)
       Hybrid Stepper Motor for 3D Printer (3.5kg)    Introduction This is another DFRobot customized high quality product.  It is a  simple 2 phases hybrid stepper motor. It features 3.5kg high torque output. It is applied in most CNC machine or 3D printer such as makerbot and ultimaker. If you want to make your own CNC or 3D printer, this motor is the most suitable one.  Usually, a CNC machine requires 3 motors and a 3D Printer requires 4.   Trying to find the right stepper motor is not an easy job.  There are so many stepper motor in the market with variant quality and price. After testing more than 10 different stepper motors,  we finally had one that meets our quality and price requirements.  This motor..
    S$26.00
  • Long Arm Ball Point Hex Ket Set - 7pc (Metric 1.5 ~ 6mm)
    A hex key or Allen key is a tool of hexagonal cross-section used to drive bolts and screws that have a hexagonal socket in the head (internal-wrenching hexagon drive). Some features of hex keys are: The tool is simple, small and light The Ball End contact works in hard to reach areas eith an 25 degree Angle entry There are six contact surfaces between bolt and driver The tool can be used with a headless screw The screw can be inserted into its hole using the key Torque is constrained by the length and thickness of the key Very small bolt heads can be accommodated The tool can be manufactured very cheaply, so one is often included with products requiring end-user assembly Either end of the tool can be used to take advantage of r..
    S$9.00