Categories

Bare PCB

Sort By:
Show:
  • Bare FR4 PCB Single Side - 5 x 7 cm (100 Per Pack)
    Bare FR4 PCB Single Side - 5 x 7 cm Material : FR4 Size : 50 x 70 x 1.6mm Copper Thickness : 1 Oz Layer : 1 Type : Bare/Plain Board Qty. Per Pack : 100 pcs ..
    S$120.00
  • Bare FR4 PCB Single Side - 6 x 9" (10 Per Pack)
    Bare FR4 PCB Single Side - 6 x 9 inch Material : FR4 Size : 154 x 229 x 1.6mm Copper Thickness : 1 Oz Layer : 1 Type : Bare/Plain Board Qty. Per Pack : 10 pcs ..
    S$60.00
  • Kinsten FR4 Single Side Epoxy 1.6 x 100 x 150 mm
    Kinsten FR4 Single Side Epoxy 1.6 x 100 x 150 mm   Description    Kinston manufacture the positive resist coated printed circuit board (PCB) for many prototyping, educational and low volume applications. Even some high volume applications have used Kinston PCB to keep the full process secure and in-house. Fiberglass is the most commonly seen PCB substrate. It has good electrical and physical characteristics, being robust with good di-electric strength. Kinston supplies it with 1oz or 2oz copper cladding (selected sizes). Fiberglass substrate is generally a straw yellow to green color, The positive resist has good exposure latitude and can produce very detailed track layouts when suitable artwork and proc..
    S$8.50
  • Kinsten PP Single Side Epoxy 1.6 x 100 x 150 mm
    Kinsten PP Single Side Epoxy 1.6 x 100 x 150 mm   Description    Kinston manufacture the positive resist coated printed circuit board (PCB) for many prototyping, educational and low volume applications. Even some high volume applications have used Kinston PCB to keep the full process secure and in-house. Fiberglass is the most commonly seen PCB substrate. It has good electrical and physical characteristics, being robust with good di-electric strength. Kinston supplies it with 1oz or 2oz copper cladding (selected sizes). Fiberglass substrate is generally a straw yellow to green color, The positive resist has good exposure latitude and can produce very detailed track layouts when suitable artwork and proce..
    S$6.50
  • PCB Etching Tank
    PCB Etching Tank The ET20 is a small in expensive tank for etching PCB's, included is a small heater, air pump and clips to support printed circuit board. Switch on, raise temperature up to 32ºC, place circuit board in tank and switch on air pump. The board should be ready in 4 minutes. Suitable for boards no larger than 345 x 225mm.   ..
    S$120.00