Categories

MOTOR

MOTOR





Sort By:
Show:
  • 10 Amp DC Motor Driver
    10 Amp DC Motor Driver MD10C is a newer version of the MD10B which is designed to drive high current brushed DC motor up to 10A 13A continuously.  It offers several enhancements over the MD10B such as support for both locked-antiphase and sign-magnitude PWM signal as well as using full solid state components which result in faster response time and eliminate the wear and tear of the mechanical relay.   Read User's Review: http://www.robotshop.com/en/cytron-13a-5-30v-single-dc-motor-controller.html   **Note that it is not for "RC PWM"    *MD10C is now Revision 3.0. * Rev 3.0 can support motor voltage range from 5V to 30V  Features: Bi-directional control for 1 br..
    S$19.00
  • 12V DC Motor 83RPM w/Encoder
    INTRODUCTION This is a Gear Motor w/Encoder, model No. GB37Y3530-12V-83R. It is a powerful 12V motor with a 131:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 16 counts per revolution of the motor shaft, which corresponds to 2096 counts per revolution of the gearbox’s output shaft.    These units have a 0.61" long, 6 mm-diameter D- shaped output shaft. This motor is intended for use at 12V, though the motor can begin rotating at voltages as low as 1V.   The face plate has six mounting holes evenly spaced around the outer edge threaded for M3 screws. These mounting holes form a regular hexagon and the centers of neighboring holes are 15.5 mm apart. ..
    S$49.00
  • 50:1 Micro Metal Gearmotor HP 6V
    50:1 Micro Metal Gearmotor HP 6V This gearmotor is a miniature high-power, 6 V brushed DC motor with a 51.45:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. Key specs at 6 V: 625 RPM and 120 mA with no load, 15 oz-in (1.1 kg-cm) and 1.6 A at stall.   Overview These tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with five different motors: high-power 6 V and 12 V motors with long-life carbon brushes (HPCB), and high-power (HP), medium power (MP), and low power (LP) 6 V motors with shorter-life precious metal brushes. The 6 V ..
    S$25.50
  • A4988 Reprap Stepper Driver with Heat Sink - Pack of 4
    A4988 Reprap Stepper Driver with Heat Sink - Pack of 4       A4988 is a complete microstepping motor driver with built-in translator for easy operation. This product is available in full, half, 1/4, 1/8 and 1/16 step modes operate bipolar stepper motors, output drive capacity of up to 35 V and ± 2 A. A4988 includes a fixed off-time current regulator, the regulator in slow or mixed decay modes. A4988 converter is the key to the easy implementation. As long as the "step" input inputting one pulse drives the motor one microstep. There are no phase sequence tables, high frequency control lines, or complex interfaces to program. A4988 interface is very suitable for complex microprocessor is unavailable or is overburdened. In the micro-step operation, A4988 ch..
    S$15.50
  • ASLONG JGB37-520 12V DC Worm Gear Motor
    Mainly used in robot platform and car provide power, Good quality and long lifetime, High torgue and Low nosie. It's running at 319RPM.   Specifications •Rated Voltage: DC 12V •No load speed: 319rpm •No Load Current: 100mA                                                                                                        •load torque: 0.28kg.cm                                            ..
    S$32.00
  • ASLONG JGY-370 24V DC, 6RPM Worm Gear Motor
    Mainly used in robot platform and car provide power, Good quality and long lifetime, High torgue and Low nosie. It's running at 6RPM.   Specifications •Rated Voltage: DC 24V •No load speed: 6rpm    ..
    S$22.00
  • DC 5V Stepper Motor With Driver
    Rated voltage : 5VDC Number of Phase 4 Speed Variation Ratio 1/64 Stride Angle 5.625° /64 Frequency 100Hz DC resistance 50Ω±7%(25℃) Idle In-traction Frequency > 600Hz Idle Out-traction Frequency > 1000Hz In-traction Torque >34.3mN.m(120Hz) Self-positioning Torque >34.3mN.m Friction torque 600-1200 gf.cm Pull in torque 300 gf.cm Insulation grade A ..
    S$11.00
  • DF15RSMG 360 Degree Motor (20kg)
    INTRODUCTION This is the most powerful standard servo sized motor from DFRobot so far. The DF15RSMG  equips with two pairs of the servo shells. One is a stardard shell with four M4 mounting holes. And the other one includes a shell with double bearing which is specially designed for the application of the robot arm or the joints.The shells of this kit are thickened to make it stable enough for motion system.   The torque of this motor is about 19kg.cm at 7.4v power supply.Using the Arduino servo library, you could drive this servo motor easily.To reduce the consumption of your microcontroller, this servo has a lock function for the pulse detection. So driving it to a target position just requires one PPM controlling ..
    S$36.00
  • DHB-10 Dual H-Bridge 10 Amp Motor Controller
    DHB-10 Dual H-Bridge 10 Amp Motor Controller The DHB-10 is an open-source, 10 amp dual H-bridge motor controller, for the Arlo Robot platform or our Motor Mount and Wheel Kit. It features an onboard multicore Propeller microcontroller to provide precise closed-loop or open-loop control for two individual motor channels. The DHB-10 comes preloaded with open-source firmware designed specifically for use with the Arlo robot platform or Motor Mount & Wheel Kit, and BASIC Stamp Board of Education, BOE Shield with Arduino Uno, or Propeller Activity Board.  Firmware updates may be loaded using a Prop Plug. (The current firmware is not designed for supporting other motor control applications.) Features Built-in 8-core 80 MHz Propeller P8X32A microcontroller wit..
    S$172.00
  • Grove - Vibration Motor
    Grove - Vibration Motor   Description It consists one coin type motor which is a Permanent Magnet coreless DC motor. It vibrates when the input is logic HIGH. It is very easy to drive and Grove compatible. Can be used in toys and cell phone modules.   ..
    S$8.00