Categories

DC MOTOR



Sort By:
Show:
  • 100:1 Metal Gearmotor 37Dx73L mm with 64 CPR Encoder
    100:1 Metal Gearmotor 37Dx73L mm with 64 CPR Encoder This gearmotor is a powerful 12V brushed DC motor with a 102.083:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 64 counts per revolution of the motor shaft, which corresponds to 6533 counts per revolution of the gearbox’s output shaft. These units have a 0.61"-long, 6 mm-diameter D-shaped output shaft. This gearmotor is also available without an encoder. Key specs at 12 V: 100 RPM and 300 mA free-run, 220 oz-in (16 kg-cm) and 5 A stall. Details for item #2826 Exact gear ratio: 25×30×28×28×3010×10×12×12×12≈102.083:1 Dimensions   ..
    S$63.80
  • 100:1 Micro Metal Gearmotor MP
    This gearmotor is a miniature (0.94" x 0.39" x 0.47") brushed DC motor with 100:1 metal gearbox, similar to Sanyo’s popular 12 mm gearmotors. These units have a 0.365"-long, 3 mm-diameter D-shaped output shaft. Key specs at 6 V: 220 RPM and 40 mA free-run, 19 oz-in (1.4 kg-cm) and 0.7 A stall. Overview These tiny brushed DC gearmotors are intended for use at 6 V, though in general, these kinds of motors can run at voltages above and below this nominal voltage, so they should comfortably operate in the 3 – 9 V range (rotation can start at voltages as low as 0.5 V). Lower voltages might not be practical, and higher voltages could start negatively affecting the life of the motor. The micro metal gearmotors are available in..
    S$25.00
  • 12V DC Motor 251rpm w/Encoder
    Introduction This is a Gear Motor w/Encoder, model No.GB37Y3530-12V-251R. It is a powerful 12V motor with a 43.7:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 16 counts per revolution of the motor shaft, which corresponds to 2096 counts per revolution of the gearbox’s output shaft. These units have a 0.61" long, 6 mm-diameter D- shaped output shaft. This motor is intended for use at 12V, though the motor can begin rotating at voltages as low as 1V. The face plate has six mounting holes evenly spaced around the outer edge threaded for M3 screws. These mounting holes form a regular hexagon and the centers of neighboring holes are 15.5 mm apart. This motor is an ideal option for your mobile robot project. Warning: Do not scre..
    S$48.00
  • 12V DC Motor 83RPM w/Encoder
    INTRODUCTION This is a Gear Motor w/Encoder, model No. GB37Y3530-12V-83R. It is a powerful 12V motor with a 131:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 16 counts per revolution of the motor shaft, which corresponds to 2096 counts per revolution of the gearbox’s output shaft.    These units have a 0.61" long, 6 mm-diameter D- shaped output shaft. This motor is intended for use at 12V, though the motor can begin rotating at voltages as low as 1V.   The face plate has six mounting holes evenly spaced around the outer edge threaded for M3 screws. These mounting holes form a regular hexagon and the centers of neighboring holes are 15.5 mm apart. ..
    S$49.00
  • 47:1 Metal Gearmotor 25Dx52L mm with 48 CPR Encoder
    This cylindrical, 2.54" x 0.98" x 0.98" brushed DC gearmotor with a 46.85:1 metal gearbox is a lower-current alternative to the HP version. It has an integrated 48 CPR quadrature encoder on the motor shaft, which provides 2249 counts per revolution of the gearbox’s output shaft. These units have a 0.315"-long, 4 mm-diameter D-shaped output shaft. These motors are intended for use at 6 V. In general, these kinds of motors can run at voltages above and below this nominal voltage, so they should comfortably operate in the 3 – 9 V range, though they can begin rotating at voltages as low as 1 V. Higher voltages could start negatively affecting the life of the motor. Gearmotor Dimensions These gearmotors have output shafts with a diameter of 4 mm. The..
    S$53.80
  • 50:1 Micro Metal Gearmotor HP 6V
    50:1 Micro Metal Gearmotor HP 6V This gearmotor is a miniature high-power, 6 V brushed DC motor with a 51.45:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter. Key specs at 6 V: 625 RPM and 120 mA with no load, 15 oz-in (1.1 kg-cm) and 1.6 A at stall.   Overview These tiny brushed DC gearmotors are available in a wide range of gear ratios—from 5:1 up to 1000:1—and with five different motors: high-power 6 V and 12 V motors with long-life carbon brushes (HPCB), and high-power (HP), medium power (MP), and low power (LP) 6 V motors with shorter-life precious metal brushes. The 6 V ..
    S$25.50
  • 70:1 Metal Gearmotor 37Dx54L mm with 64 CPR Encoder
    This 2.62" × 1.45" × 1.45" gearmotor is a powerful 12V brushed DC motor with a 70:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 64 counts per revolution of the motor shaft, which corresponds to 4480 counts per revolution of the gearbox’s output shaft. These units have a 0.61"-long, 6 mm-diameter D-shaped output shaft. This gearmotor is also available without an encoder. Key specs at 12 V: 150 RPM and 300 mA free-run, 200 oz-in (14 kg-cm) and 5 A stall. Dimensions Size: 37D x 66L mm Weight: 7.7 oz Shaft diameter: 6 mm General specifications ..
    S$70.00
  • ASLONG JGB37-520 12V DC Worm Gear Motor
    Mainly used in robot platform and car provide power, Good quality and long lifetime, High torgue and Low nosie. It's running at 319RPM.   Specifications •Rated Voltage: DC 12V •No load speed: 319rpm •No Load Current: 100mA                                                                                                        •load torque: 0.28kg.cm                                            ..
    S$32.00
  • ASLONG JGY-370 24V DC, 6RPM Worm Gear Motor
    Mainly used in robot platform and car provide power, Good quality and long lifetime, High torgue and Low nosie. It's running at 6RPM.   Specifications •Rated Voltage: DC 24V •No load speed: 6rpm    ..
    S$22.00
  • DC 5V Stepper Motor With Driver
    Rated voltage : 5VDC Number of Phase 4 Speed Variation Ratio 1/64 Stride Angle 5.625° /64 Frequency 100Hz DC resistance 50Ω±7%(25℃) Idle In-traction Frequency > 600Hz Idle Out-traction Frequency > 1000Hz In-traction Torque >34.3mN.m(120Hz) Self-positioning Torque >34.3mN.m Friction torque 600-1200 gf.cm Pull in torque 300 gf.cm Insulation grade A ..
    S$11.00