Categories

STEPPER MOTOR



Sort By:
Show:
  • BIPOLAR STEPPER MOTOR WITH PLANET GEAR BOX (18KG.CM)
    INTRODUCTION This bipolar stepper motor with planet gear box (gear ratio: 5.18) uses a standard 8mm-diameter D type output shaft, and has a 1.8° step angle (200 steps/revolution). Each phase draws 1.6 A at 2.78 V, allowing for a holding torque of 18kg-cm (176N-cm). The motor has a body dimension of 42mm square and 40mm in length, while the planet gear box is 36mm in diameter and 27mm in length. The motor has four color-coded wires terminated with bare leads: black and green connect to one coil; red and blue connect to the other. It can be easily mounted with 4 M3 threaded holes and can be controlled with the Dual Bipolar Stepper Motor Shield for Arduino (A4988).      Notice: please carefully confirm techical details (torque, dimension, mount..
    S$77.50
  • DC 5V Stepper Motor With Driver
    Rated voltage : 5VDC Number of Phase 4 Speed Variation Ratio 1/64 Stride Angle 5.625° /64 Frequency 100Hz DC resistance 50Ω±7%(25℃) Idle In-traction Frequency > 600Hz Idle Out-traction Frequency > 1000Hz In-traction Torque >34.3mN.m(120Hz) Self-positioning Torque >34.3mN.m Friction torque 600-1200 gf.cm Pull in torque 300 gf.cm Insulation grade A ..
    S$11.00
  • Hybrid Stepper Motor for 3D Printer (3.5kg)
       Hybrid Stepper Motor for 3D Printer (3.5kg)    Introduction This is another DFRobot customized high quality product.  It is a  simple 2 phases hybrid stepper motor. It features 3.5kg high torque output. It is applied in most CNC machine or 3D printer such as makerbot and ultimaker. If you want to make your own CNC or 3D printer, this motor is the most suitable one.  Usually, a CNC machine requires 3 motors and a 3D Printer requires 4.   Trying to find the right stepper motor is not an easy job.  There are so many stepper motor in the market with variant quality and price. After testing more than 10 different stepper motors,  we finally had one that meets our quality and price requirements.  This motor..
    S$26.00
  • L298N Dual H Bridge Stepper Motor Driver Module
    L298N Dual H Bridge Stepper Motor Driver Module PRODUCT DESCRIPTION L298N Dual H Bridge DC Stepper Motor Drive Controller Board Module For Arduino   The L298 Stepper Controller makes it easy to  drive either two DC motors or a bipolar stepper motor. This is a very high quality board and is very compact for designs where space really matters. Features :   Double H bridge drive Chip L298N (ST NEW) Logical voltage 5V Drive voltage 5V-35V Logic current 0mA-36mA ..
    S$9.50
  • STEPPER MOTOR: BIPOLAR, 200 STEPS/REV, 42×38MM, 2.8V, 1.7 A/PHASE
    This NEMA 17-size hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 1.7 A at 2.8 V, allowing for a holding torque of 3.7 kg-cm (51 oz-in). Overview This hybrid bipolar stepping motor has a 1.8° step angle (200 steps/revolution). Each phase draws 1.7 A at 2.8 V, allowing for a holding torque of 3.7 kg-cm (51 oz-in). The motor has four color-coded wires terminated with bare leads: black and green connect to one coil; red and blue connect to the other. It can be controlled by a pair of suitable H-bridges (one for each coil), but we recommend using a bipolar stepper motor driver. Our DRV8825 stepper motor driver carrier is probably the best option for this stepper motor. ..
    S$36.00