Categories

Motor Bracket / Holder / Accessories

Sort By:
Show:
  • 100mm Mecanum Wheel Set (2x Left, 2x Right)
    Description • Number of rollers / plates each wheel: 9 / 2 • Body material: aluminium alloy • Roller material: rubber • Spacer material: nylon • A set of mecanum wheels including 4 pieces of wheels Nexus Robot introduces the 100mm Mecanum Wheel Set (2x Left, 2x Right). The mecanum wheels are design for a wheel which can move in any direction. The angled peripheral rollers translate a portion of the force in the rotational direction of ht wheel to a force normal to the wheel direction. Depending on each individual wheel direction and speed, the resulting combination of all these forces produce a total force vector in any desired direction. This kit is made up of 2x 100mm Left Mecanum Wheel and ..
    S$336.00
  • 5mm Aluminum Timing Pulley For 3D Printer (2 pcs)
    5mm Aluminum Timing Pulley For 3D Printer (2 Pcs) INTRODUCTION     This is an 20 tooth timing pulley with a center diameter of 5mm (0.2"), this is a good fit for mounting on common stepper motors. These pullies are great for many mechanical projects. They are also commonly used in 3D printers.        SPECIFICATION     Teeth: 20 Inner diameter: 5mm(0.2") Teeth diameter: 12.5mm (0.49") Teeth Width: 6.8mm (0.27") Outer diameter: 15 mm (0.59") Fastening screws: M3 x2     SHIPPING LIST     5mm Aluminum Timing Pulley For 3D Printer x2 M4 embedded screw  ..
    S$13.80
  • DC Motor Mount
    DC Motor Mount material: 7005 Aluminum ..
    S$52.00
  • DC Motor Power Lead - 10
    DC Motor Power Lead PACKING : 10/PACK   ..
    S$60.00
  • Motor Adapter for NI myRIO
    The Motor Adapter for NI myRIO allows you to easily connect and control either one stepper motor, two DC motors or two servos independently through the MXP connector on your myRIO. It has been designed so that no additional circuitry is required. Just supply power and you're on your way! Servo motors are connected via standard 3 pin headers while DC motors are connected via 6-pin or screw terminal connectors and stepper motors are connected using screw terminals. Two quadrature encoder inputs are accessible through the motor connector or through terminal blocks. Uses the myRIO Expansion Port (MXP) connector Can be configured to work with 2 DC motors, 1 stepper motor, or 2 RC servos Current control and sensing built in 6V-16V input voltage ..
    S$299.00
  • MOTOR BRACKET KIT FOR ASLONG JGY-370
    MOTOR BRACKET KIT FOR ASLONG JGY-370 This Motor Bracket Kits is Special design for mounting of DC Motor JGY-370. It comes with a 6mm Motor Hub, L Sharp Mounting Bracket 30x100mm and a Long Rectangle Alu Plate78x15mm. Screw included for the Motor Hub Only. ..
    S$28.00
  • MXL Belt (446MXL 583) For OverLord 3D Printer
    MXL Belt (446MXL 583) For OverLord 3D Printer INTRODUCTION   This part is the belt,transfer power from stepper motor to sliding block. Compatible with both the OverLord and OverLord Pro.     SPECIFICATION     Tooth number:583     SHIPPING LIST     MXL Belt (446MXL 583) for OverLord 3D Printer x1 ..
    S$13.80
  • Pololu 20D mm Metal Gearmotor Bracket Pair
    These aluminum gearmotor brackets let you securely mount Pololu’s 29:1, 73:1, and 154:1 20D mm metal gearmotors to your project. The brackets are sold in pairs, and each bracket includes two M2.5 screws for securing the motor to the bracket. Each bracket also features three mounting holes and ten mounting slots for M3 or #4-size screws (not included), giving you a variety of mounting options. These light-weight brackets (under 5 g each) are specifically designed for the 29:1, 73:1, and 154:1 metal gearmotor 20D mm. Each bracket features three mounting holes and ten mounting slots (five along each edge) for M3 or #4-size screws, giving you a variety of mounting options. A total of four M2.5 screws (two for each bracket) are included for securing the motors to the brack..
    S$12.80
  • Pololu 25D mm Metal Gearmotor Bracket Pair
    These aluminum gearmotor brackets let you securely mount Pololu’s 25D mm metal gearmotors to your project. The brackets are sold in pairs, and each bracket includes four M3 screws for securing the motor to the bracket. Each bracket also features seven mounting holes and fourteen mounting slots for M3 or #4-size screws (not included), giving you a variety of mounting options. These light-weight brackets (about 8 g each) are specifically designed for the Pololu 25D mm metal gearmotors, including the same motors used in the Wild Thumper chassis. Each bracket features seven mounting holes and fourteen mounting slots (seven along each edge) for M3 or #4-size screws, giving you a variety of mounting options. A total of four M3 screws (two for each bracket) are included for ..
    S$14.50
  • Pololu Micro Metal Gearmotor Bracket Extended Pair
    These plastic mounting brackets allow you to easily and securely mount the ubiquitous 10 mm x 12 mm x 26 mm metal gearhead motors first popularized by Sanyo’s 12GN series (e.g. NA1S…NA3S), such as our micro metal gearmotors and the Solarbotics mini metal gear motors (GM12a, GM13a, GM14a, and GM18). We also offer shorter versions of these brackets in black plastic and white plastic.   Four #2-56×7/16" screws and four nuts are included. This extended version of the bracket is designed to allow a portion of the ..
    S$7.90