Electronics And Accessories

Sort By:
  • 10 Amp DC Motor Driver
    10 Amp DC Motor Driver MD10C is a newer version of the MD10B which is designed to drive high current brushed DC motor up to 10A 13A continuously.  It offers several enhancements over the MD10B such as support for both locked-antiphase and sign-magnitude PWM signal as well as using full solid state components which result in faster response time and eliminate the wear and tear of the mechanical relay.   Read User's Review:   **Note that it is not for "RC PWM"    *MD10C is now Revision 3.0. * Rev 3.0 can support motor voltage range from 5V to 30V  Features: Bi-directional control for 1 br..
  • 2 Servo Joystick
    2 Servo Joystick Introducing our new 2 Servo Precision Joystick. This new joystick can control up to 2 servos proportionally. Simply plug in a 4.8 - 6.0 volt battery or power supply and connect the servos to control them via joystick. The front panel can be opened for access to the control pins which can be switched with one another or reversed to fit your application. The case is machined from durable 1/4” ABS plastic. The joystick can easily be mounted to a flat surface using the mounting holes at the top and bottom. Includes operation manual. To control analog servos up to 180°, use our servo stretcher with the joystick. Servos, battery and/or power supply sold separately. If you are not using a power supply, you can..
  • 58mm Plastic Omni Wheel for LEGO NXT and Servo Motor
    58mm Plastic Omni Wheel for LEGO NXT and Servo Motor This is a latest design of 58mm LEGO compatible Omni directional robot wheel,it's useful as they roll freely, The 58mm plastic omni wheel is a robust,durable and double row wheel that provides easy 360°movement prope with rotational and sideways manoeuvrability. It comes with an NXT compatible hub and an Axle Centre hub for the Arduino motors. if you use this omni wheel on your robot, it can be able to forward/backwards and rotation without changing its orientation.      Specifications:   Body&Roller Color: Black&Grey Wheel Diameter: 58mm Roller Diameter: 13mm Body Material: Nylon Roller Material: Nylon+PE Load capacity: 3KG N..
  • 5mm Aluminum Timing Pulley For 3D Printer (2 pcs)
    5mm Aluminum Timing Pulley For 3D Printer (2 Pcs) INTRODUCTION     This is an 20 tooth timing pulley with a center diameter of 5mm (0.2"), this is a good fit for mounting on common stepper motors. These pullies are great for many mechanical projects. They are also commonly used in 3D printers.        SPECIFICATION     Teeth: 20 Inner diameter: 5mm(0.2") Teeth diameter: 12.5mm (0.49") Teeth Width: 6.8mm (0.27") Outer diameter: 15 mm (0.59") Fastening screws: M3 x2     SHIPPING LIST     5mm Aluminum Timing Pulley For 3D Printer x2 M4 embedded screw  ..
  • A4988 Reprap Stepper Driver with Heat Sink - Pack of 4
    A4988 Reprap Stepper Driver with Heat Sink - Pack of 4       A4988 is a complete microstepping motor driver with built-in translator for easy operation. This product is available in full, half, 1/4, 1/8 and 1/16 step modes operate bipolar stepper motors, output drive capacity of up to 35 V and ± 2 A. A4988 includes a fixed off-time current regulator, the regulator in slow or mixed decay modes. A4988 converter is the key to the easy implementation. As long as the "step" input inputting one pulse drives the motor one microstep. There are no phase sequence tables, high frequency control lines, or complex interfaces to program. A4988 interface is very suitable for complex microprocessor is unavailable or is overburdened. In the micro-step operation, A4988 ch..
  • DC Motor Power Lead - 10
    DC Motor Power Lead PACKING : 10/PACK   ..
  • DHB-10 Dual H-Bridge 10 Amp Motor Controller
    DHB-10 Dual H-Bridge 10 Amp Motor Controller The DHB-10 is an open-source, 10 amp dual H-bridge motor controller, for the Arlo Robot platform or our Motor Mount and Wheel Kit. It features an onboard multicore Propeller microcontroller to provide precise closed-loop or open-loop control for two individual motor channels. The DHB-10 comes preloaded with open-source firmware designed specifically for use with the Arlo robot platform or Motor Mount & Wheel Kit, and BASIC Stamp Board of Education, BOE Shield with Arduino Uno, or Propeller Activity Board.  Firmware updates may be loaded using a Prop Plug. (The current firmware is not designed for supporting other motor control applications.) Features Built-in 8-core 80 MHz Propeller P8X32A microcontroller wit..
  • High Current Adapter for NI myRIO
    High Current Adapter for NI myRIO With the High Current Adapter, you can use your NI myRIO to interact with high current applications such as driving LED Strips, relays, and servos. The High Current Adapter is able to run applications from 3V-16V and can deliver current up to 4A, providing users with a way to plug their applications in directly without any additional electronics required.   Uses the myRIO Expansion Port (MXP) connector Supports 3V - 16V output voltage (external power supply required) 4 Open drain outputs Continuous current: 3.0A (25°C) / 2.2A (85°C) Peak output current: 4.1A (t<5s) 4 Standard 3 terminal relay outputs Common, Normally Closed, Normally Open ..
  • HPP-21 Plus+ Servo Programmer
    HPP-21 Plus+ Servo Programmer The all new HPP-21 Plus+ will allow you to easily check any servo brand’s servo performance by using servo test functions and set most for the programmable parameters of Hitec digital servo types as noted below. The Plus+ unit allows you to also perform all of these functions out in the field and not be constrained to a computer. This unit is a must have for those using Hitec digital servos in various applications.  The HPP-21 Plus+ will program the following features of these Hitec digital servos: - All HS-7XXX G2 servos: Fully programmable, including OLP Rate and high resolution adjustments. - Some HS-5XXX types servos: Fully programmable Feather and Micro Digital servos including OLP Rate; e..