Sort By:
  • Rainbowduino LED driver platform - Atmega 328
    The Rainbowduino board (V3.0) is an Arduino compatible controller board with professional multiplexed LED driver. It can drive a 8x8 RGB Led Matrix or a 4x4x4 RGB LED Cube in common Anode mode. Rainbowduino v3.0 uses two MY9221 chips which is a 12-channels (R/G/B x 4) constant current Adaptive Pulse Density Modulation(APDM). Rainbowduino v3.0 has provisions for cascading more such boards with I2C interface. Rainbowduino v3.0 is flashed with Arduino boot-loader and this makes it easy to program sketches using Arduino IDE. Unlike other LED drivers, this comes with a USB to UART (FT232RL) inbuilt for programming the sketches.   Features Provides 2 x 16 pin header for connecting multiplexed LEDs ..
  • Seeeduino Lite
    Seeeduino Lite shares many similarities with Arduino Leonardo. It is a microcontroller board based on Atmega32U4 chip. The chip has about the same amount of flash, RAM and capability as the ATmega328 found in the Seeeduino. It has 20 digital I/Os (7 of which can output PWM),a micro USB connection, a power jack, an ICSP header, and a reset button. . It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter to get started.    Seeeduino Lite differs from all Arduino boards in that the voltage select switch affects the I/O output voltage, high level of I/O output is consistent with voltage switch. And there are I2C Interfaces、UART Interfaces and Grove Interfaces provide convenience for..
  • Seeeduino Mega
    In the pursuit for small form factor, flexibility and functionality comes Seeeduino Mega – derived from Arduino Mega it harnesses the power of ATmega2560 to spice up your project building experience.   Features ATmega 2560 @ 16MHz Selectable 5V/3.3V operation 70 Digital IO 16 Analog inputs 14 PWM outputs 4 Hardware serial ports (UART) Compatible with most Arduino Duemilanove and Diecimila Shields Small form factor, 30% smaller than Arduino Mega Easy to program, no additional hardware is required to load firmware – just plug to a USB port and you’re good to go. ICSP Header Can be powered through a battery or through a AC to DC adaptor Documents  ..
  • Seeeduino V4.2
    Seeeduino v4 is an Open Source, Arduino-compatible ATmega328 MCU development board. We think Seeeduino v4 is one of the best Arduino derivatives/compatibles available. Seeeduino v4 is feature rich, much more stable, easy-to-use and even good looking. Seeeduino v4 is based the Arduino UNO bootloader, an ATmega16U2 as a UART-to-USB converter (basically work like an FTDI USB2UART chip).eract with low voltage sensors. Finally, the three on-board Grove interfaces can make your board connect to Grove modules easily. Want to make something awesome, maybe just a Seeeduino v4.2 and some Groves is enough. Features Fully compatible with Arduino UNO ATmega328 microcontroller 14 Digital I/O Pins (6 PWM outputs) 6 Analog Inputs ISP Header Arduino UNO-..
  • Xadow - Main Board
    The module is a microcontroller board based on the controller ATmega32U4 with 32k flash. Board can be powered either from the USB connection or a Lithium battery(80mA output current). And the board can charge for the Lithium battery through the USB port. The USB port on the board can be also used for upload program.When you upload program to the Xadow Main Board as you do with other Arduino boards, please select "Seeeduino Xadow" from the Tools > Board menu. It is a indispensable part in the Xadow Kit.   Features Can Stackable Low Consumption Small Volume   Xadow is a though small but perfectly formed Arduino(TM) compatible board series containing several modules. It's a kit extremely suitable for space-sensitive projects suc..