Categories

ROBOCRAFT

Sort By:
Show:
  • Tamiya 71101 Mechanical Dog - Four Leg Walking Type
    How it works Motor rotation is transferred to the legs via crank plates and linkage rods, causing the Mechanical Dog to walk. The dog’s stride depends on the crank holes to which the front legs are attached, which means there are four possible strides for you to choose from. Put this together with the two possible gear ratios and you’ve got an 8-speed puppy. Gripping parts at the end of each leg to change position according to speed for smooth movement. The body is made from a transparent yellow ABS resin that allows you to see all of the motors, gears, cranks, and linkage rods in action. ..
    S$29.90
  • Tamiya 71102 Mechanical Kangaroo - Two Leg Jumping Type
    How it works A gearbox connected via crank plates to the kangaroo’s rear legs transforms motor rotation into walking/hopping. You can choose between two different gear ratios for the gearbox assembly. When using the high-speed gear ratio, linkage rods should be attached to the lower holes of front legs and kangaroo hops upright while balancing on its tail. Changing the position of the tail allows the kangaroo to keep balance during high-speed running and enables it to change direction. Putting the tail straight will make the kangaroo go straight while setting it to the right/left will make the kangaroo turn to the right/left. When using the low-speed gear ratio, linkage rods should be attached to the upper holes of front legs and the kangaroo walks on all fours. Attaching th..
    S$29.90
  • Tamiya 71103 Mechanical Beetle - Obstacle Avoiding Type
    How it works Motor rotation is transferred to the legs via crank plates and linkage rods, causing the Mechanical Beetle to walk forwards or backwards at one of two selectable speeds. A linkage rod connected to the beetle’s front right leg swings its horn left and right as the beetle walks. When it bumps into an obstacle, the beetle automatically turns to avoid it and continues walking. Because of this behavior, the beetle can provide amusement by simply running around in a small, enclosed space. The body is made from a transparent green ABS resin that allows you to see all of the motors, gears, cranks, and linkage rods in action. ..
    S$29.90
  • Tamiya 71104 Mechanical Ostrich - Two Leg Walking Type
    How it works Motor rotation is transferred to the legs via crank plates and linkage rods, causing the Mechanical Ostrich to walk at one of two selectable speeds. The body is made from a transparent purple ABS resin that allows you to see all of the motors, gears, and cranks in action. The battery and motor are positioned for optimum weight balance.   Basic specifications Total length: 135 mm Total weight: 100 g (without batteries) Body material: ABS resin 2 p..
    S$29.90
  • Tamiya 71105 Mechanical Giraffe - Four Leg Walking Type
    How it works Motor rotation is transferred to the legs via crank plates and linkage rods, causing the Mechanical Giraffe to walk. The body is made from a transparent yellow ABS resin that allows you to see all of the motors, gears, cranks, and linkage rods in action.   Basic specifications Total length: 190 mm Total weight: 110 g (without batteries) Body material: ABS resin Gearbox, motor, and control switch are included. A screwdriver for the assembly is provided. Requires one AA (a.k.a. R6 or UM3) battery (not included). Co..
    S$29.90
  • Tamiya 71106 Mechanical Turtle - Four Leg Crawling Type
    How it works The Mechanical Turtle crawls forwards or backwards using its front leg plate. This plate is attached to the turtle body by a ball joint and serves as a fulcrum that is driven by a gearbox crank plate. The Mechanical Turtle’s body is made from transparent green ABS resin, which lets you see all of the internal components in action.   Basic specifications Total length: 166 mm Total weight: 95 g (without batteries) Body material: ABS resin Gearbox, motor, and control switch are included. A screwdriver for the assembly is provided. ..
    S$29.90
  • Tamiya 71108 Mechanical Rabbit - Hopping Type
    How it works Motor rotation is transferred to the legs via crank plates and linkage rods, causing the rear legs kick the robot forward in a hopping motion. As more of the weight is supported by the front legs, rollers attached to the feet eliminate the friction that would result from this extra load. The Mechanical Rabbit’s body is made from a transparent pink ABS resin that allows you to see all of the motors, gears, cranks, and linkage rods in action.   Battery moved forward for effective movement. The Mechanical Rabbit is powered by a sin..
    S$29.90
  • Tamiya 71109 Mechanical Tiger - Four Legged Walking Type
    How it works Motor rotation is transferred to the legs via crank plates and linkage rods, causing the Mechanical Tiger to walk. The tiger’s stride depends on the crank holes to which the front legs are attached, which means there are four possible strides for you to choose from. Put this together with the two possible gear ratios and you get eight possible speeds. A reverse switch also allows backward movement. The body is made from a transparent yellow ABS resin that allows you to see all of the motors, gears, cranks, and linkage rods in action. ..
    S$29.90
  • Tamiya 71111 Mechanical Pig - Shaking Head Type
    How it works Motor rotation is transferred to the legs via crank plates and linkage rods, causing the Mechanical Pig to walk. Plastic rods on the front legs push the head left and right as the pig walks. The body is made from a transparent pink ABS resin that allows you to see the motor, gears, cranks, and linkage rods in action.   Basic specifications Total length: 135 mm Total weight: 95 g (without batteries) Body material: ABS resin Gearbox motor, gearbox,..
    S$29.90
  • Tamiya 71112 Mechanical Racehorse - Galloping Type
    How it works Motor rotation is transferred to the legs via cranks and linkage rods, causing the Mechanical Racehorse to gallop. Two linkage rod holes on the rear legs allow you to choose between two running styles. The mechanical horse is comprised of mainly transparent orange plastic, which allows you to easily see the internal mechanics in action. How it works Identification Stickers This kit it includes 3 different sets of stickers. Each sticker set contains a horse’s mask and number and jockey’s clothing. These stickers let you make your model easily distinguishable while racing with friends! ..
    S$29.90