Categories

RFID

Sort By:
Show:
  • 3.3V RC522 Chip IC Card Induction Module RFID Reader 13.56MHz 10Mbit/s
    3.3V RC522 Chip IC Card Induction Module RFID Reader 13.56MHz 10Mbit/s   Description: RC522 chip: MF RC522 is applied to the highly integrated read and write 13.56MHz contactless communication card chip, NXP launched by the company for the "table" application of a low-voltage, low-cost, small size of the non-contact card chip to read and write, smart meters and portable handheld devices developed better choice. The MF RC522 use of advanced modulation and demodulation concept completely integrated in all types of 13.56MHz passive contactless communication methods and protocols. 14443A compatible transponder signals. The digital part of to handle the ISO14443A frames and error detection. In addition, support rapid CRYPTO1 encryption algorithm, terminology validati..
    S$9.90
  • Google TagPak™ L - 3x100 Tags
    Quick Overview The Google TagPak includes all of our Google Tags. It consists of 100 tags of each type: • Topaz512 Google NFC Tags; 80x50mm (Type 1, Broadcom); description here. • Mifare Ultralight C Google NFC Tags; 80x50mm (Type 2, NXP); description here. • Mifare DESFire 2k Google NFC Tags; 80x50mm (Type 4, NXP); description here. Details Chips: ISO/IEC 14443 Type A modulation scheme; Topaz 512 chip; Passive RFID 13.56MHz; ISO / IEC 14443 Type A 1-3 compliant; MIFARE Ultralight C chip; Passive RFID 13.56MHz ISO / IEC 14443 Type A 1-4 compliant; Mifare Desfire EV1 2K chip; Passive RFID Read and Write Operation: 106 kbit/s communication speed; Anti-collision support; 1536 bits (192 bytes) EEPROM memory, (144 bytes) writable memory; Cloning pro..
    S$1,032.00
  • Google TagPak™ M - 3x25 Tags
    Quick Overview The Google TagPak includes all of our Google Tags. It consists of 25 tags of each type: • Topaz512 Google NFC Tags; 80x50mm (Type 1, Broadcom); description here. • Mifare Ultralight C Google NFC Tags; 80x50mm (Type 2, NXP); description here. • Mifare DESFire 2k Google NFC Tags; 80x50mm (Type 4, NXP); description here. ..
    S$260.00
  • MTO - Round Sticker - 200
    This is an make to Order sticker for NFC Tag (Round) with 200 units. Price include Printing and design Layout. Plesae contact us for further detail. ..
    S$250.00
  • NFC Classic Sticker
    Introduction NFC classic sticker (13.56MHz) is widely used in electronic locks or customer identification as well as other systems where a small and easy to carry tag is desired.The tag contains a NXP S50 chip and an antenna, and is passively powered by the reader/writer when placed a couple inches away.    This Mifare-One Sticker can be read by almost any 13.56MHz RFID/NFC reader or NFC-enabled mobile devices.These chips can be written to & store up to 1 KB of data in writable EEPROM divided into banks, and can handle over 100,000 re-writes.Every sticker has a permanent 4-byte ID burned into the chip that you can use to identify one tag from another - the ID number cannot be changed.   The NXP TagWriter application will be helpful to format(NDEF e..
    S$2.60
  • NFC Module for Arduino
    Introduction Your credit cards: gone. Bus pass and train tickets: vanished.Welcome to Near Field Communications (NFC), a contactless, Wi-Fi-lite style tech that could already be in your smartphone, and could soon be a regular feature of your commute.   Near Field Communications(NFC) is a set of short-range wireless technologies, typically requiring a distance of 10cm or less, for two devices such as smartphones or the similar things very close to each other to establish communication. Communication is also possible between a NFC device and unpowered NFC chips such as tags, stickers, key fobs and cards which do not require batteries.   The NFC Module for Arduino is designed to extend this powerful feature for your project or application based on Arduino.It i..
    S$35.00
  • NFC Sticker (Round)
    Introduction NFC round sticker (13.56MHz) is widely used in electronic locks or customer identification as well as other systems where a small and easy to carry tag is desired.The tag contains a NXP S50 chip and an antenna, and is passively powered by the reader/writer when placed a couple inches away.    This blank NFC Sticker can be read by almost any 13.56MHz RFID/NFC reader or NFC-enabled mobile devices.These chips can be written to & store up to 1 KB of data in writable EEPROM divided into banks, and can handle over 100,000 re-writes.Every sticker has a permanent 4-byte ID burned into the chip that you can use to identify one tag from another - the ID number cannot be changed.   The NXP TagWriter application will be helpful to format(NDEF exch..
    S$2.60
  • NFC Tag (Round)
    Introduction NFC Tag (13.56MHz) is widely used in electronic locks or customer identification as well as other systems where a small and easy to carry tag is desired.The tag contains a NXP S50 chip and an antenna, and is passively powered by the reader/writer when placed a couple inches away.    This Mifare-One NFC tag can be read by almost any 13.56MHz RFID/NFC reader or NFC-enabled mobile devices.These chips can be written to & store up to 1 KB of data in writable EEPROM divided into banks, and can handle over 100,000 re-writes.Every sticker has a permanent 4-byte ID burned into the chip that you can use to identify one tag from another - the ID number cannot be changed.   The NXP TagWriter application will be helpful to format(NDEF exchange prot..
    S$2.70
  • RFID-NFC Plug & Play Kit with LCD
    NFC/ISO14443 OEM reader USB + LCD board - The popular and easy to use NFC Plug & Play Starter Kit. The kit contains the NFC-RFID APPB Plug & Play Module, a LCD board with connection cable, a CD-ROM with documentation, source code example (in C++) as well as an USB cable. Details The intelligent reader firmware allows an easy and fast access to a big a variety of 13.56 MHz RFID chips without deep RFID knowledge. The NFC reader module is ideal for the integration in information kiosks, vending machines, entry systems or desktop reader. The APPB Plug & Play NFC-RFID reader module is easy to use, includes an integrated antenna and the possibility for to read/write digital inputs & outputs. With the assembled wire-to-board connector it is possible to connect external ..
    S$650.00