Categories

WiFi

Sort By:
Show:
  • 150M Miniature WiFi (802.11n) Module for Raspberry Pi
    150M Miniature WiFi (802.11n) Module for Raspberry Pi INTRODUCTION EDUP"s Wireless-N USB 2.0 Adapter allows you to connect your devices such as laptop, PC and miniPC to any Wireless-N networks in your home or office. The Wireless-N (802.11n) USB 2.0 Adapter is great for those who want to connect devices to internet over a Wireless-N network.   At 5 times faster than traditional Wireless-G (802.11b) networks, Wireless-N networks allow for high speed data transfers, online gaming, and lightning fast downloads. The Wireless-N USB 2.0 Adapter gives you access to all the high-speed features of Wireless-N networks on any devices. Its simple and easy setup means you"ll be surfing the internet, downloading movies..
    S$14.50
  • 3G Shield
    3G Shield Description: 3G Shield is an expansion board based on the SIM5216E Module, and SIM5215 series module is a multi-frequency HSDPA / WCDMA / GSM / GPRS / EDGE module solution that supports HSDPA data transmission at a speed of no more than 3.6Mbps. 3G Shield can directly replace the SIM5215, compatible with its Hardware and Software. The rich application features of 3G shield, such as supporting embedded LUA script, or TCP/ UDP/ FTP/ HTTP/ HTTPS/ SMTP/ POP3/ MMS and other software features, provide customers with more application flexibility, and greatly facilitate customers to do application integration. Meanwhile, its unique camera interface and video telephony features provide additional value to the monitoring program. The module can be widel..
    S$116.00
  • Arduino Wireless SD Shield
    Wireless SD Shield Overview The Wireless SD shield allows an Arduino board to communicate wirelessly using a wireless module. It is based on the Xbee modules from Digi, but can use any module with the same footprint. The module can communicate up to 100 feet indoors or 300 feet outdoors (with line-of-sight). It can be used as a serial/usb replacement or you can put it into a command mode and configure it for a variety of broadcast and mesh networking options. The shields breaks out each of the Xbee's pins to a through-hole solder pad. Included on board is a SD card slot. When using the SD Library to access the card, Pin 4 is CS and cannot be used otherwise. SPI also relies on pins 11, 12, and 13 for communication. An on-board switch allows the wireless module to com..
    S$40.80
  • Camera H.264 - 1080P Wifi Aerial miniature Pin hole with battery
    Camera H.264 - 1080P Wifi Aerial miniature Pin hole with battery Power Supply(V): DC 3.7V Power Consumption(W): 260MA Sensor Brand: SONY Sensor: CMOS Ships From: Singapore Viewing Angle (Degree): 90° Connectivity: Wifi 2.4G Supported Mobile Systems: iPhone OS,Windows Mobile,Android Supported Operating Systems: Windows XP,Windows Vista,Windows 7,Mac os,Windows 8 Type: Video Camera Video Compression Format: H.264 Lens (mm): 2.8mm Minimum Illumination(Lux): See parameters and specifications High Definition: 1080P(Full-HD) Style: Mini Pin Hole Camera Model Number: SG - Z6S13 Minimum illumination: 1LUX Power Sup..
    S$230.00
  • Cytron ESP8266 WiFi Shield
    Cytron ESP8266 WiFi Shield Because of IoT (Internet of Thing), everything is connected to Internet, a crucial element is WiFi that provide wireless connection to Internet. We have been carrying ESP module and many have used it. However it is not user friendly enough for beginner. The module is 3.3V powered and the pins are not properly broken out. Intergrating it to PIC or Arduino will require some skill and electronics interface.   With this ESP WiFi shield, it will be plug and use for Arduino user. The shield come preassembled with ESP8266-12 WROOM-02 module which offers WiFi connection to your Arduino board or project. No additional soldering or wiring needed, just stack the shield on to Genuino UNO, CT-ARM, CT-UNO, Genuino Meg..
    S$20.90
  • ESP8266 Based Arduino Uno Like WiFi Board: D1
    ESP8266 Based Arduino Uno Like WiFi Board: D1 The D1 is an Arduino Uno-like wifi board based on ESP-8266EX. 11 digital input/output pins 1 analog input(3.3V max input) a Micro USB connection a power jack, 9-24V power input. Compatible with Arduino.   Specification Microcontroller ESP-8266EX Operating Voltage 3.3V Digital I/O Pins 11 Analog Input Pins 1 Clock Speed 80MHz/160MHz FLash 4M bytes Length 68.6 m..
    S$30.00
  • ESP8266 Serial-to-WiFi Module
    ESP8266 is a new player in this field: it’s tiny (25mm x 15mm), with simple pin connections (standard 2×4 pin headers), and best of all, it’s extremely cheap! What is Serial-to-WiFi? Simply put, it means using serial TX/RX to send and receive Ethernet buffers, and similarly, using serial commands to query and change configurations of the WiFi module. This is quite convenient as it only requires two wires (TX/RX) to communicate between a microcontroller and WiFi, but more importantly, it offloads WiFi-related tasks to the module, allowing the microcontroller code to be very light-weighted. There are already a lot of excitements and resources you can find online about ESP8266. below are a few links that you can try out ; English Datasheets and Infor..
    S$10.90
  • ESP8266 WiFi Module
    DESCRIPTION- This interesting module is a lot of fun for hobbyists and students who are interested in experimenting with the ESP8266 WiFi chipset. We bought a bunch of these modules, updated the firmware to the much-easier-to-use v0.924 and wrote some Arduino code to grab a webpage. We do not have a detailed tutorial at this time, this chipset/module is for the curious and adventurous! There's tons of details and experiementation over at http://www.esp8266.com This module is very low cost, but very simple. It doesn't support SSL, or communcation over SPI - just UART!  It doesn't have 5V to 3V logic level shifting so you'll probably want to pick up a logic level shifter, it also doesn't have a regulator on board and it can use big spikes of 300mA or ..
    S$12.10
  • Measy Smart Remote
    Wireless 2.4GHz radio frequency with USB receiver All of the key’s lifespan up to 1,500,000 times Auto sleep mode: Automatically into sleep mode 2 minutes left without operation To enjoy PC multi-media entertainment at home To enjoy Android TV box and smart TV Convenient and efficient for conference, presentation and lecturing Specifications: 2.4GHz DSSS radio transceiver,30m max distance Powered by 3 x AAA battery (Not included) System requirements: Windows 98/2000/Me/Vista/NT/ XP/7,Android,Linux(Debian-3.1, Redhat-9.0),Mac Product weight: 126 g Package weight: 165 g Product size (L x W x H): 20.0 x 5.6 x 2.5 cm Package size (L x W x H): 23.5 x 6.8 x 3.0 cm   ..
    S$49.90
  • Mesh Bee - Open Source Zigbee Pro Module with MCU (JN5168)
    Mesh Bee is a 2.4GHz wireless transceiver from seeed studio. It's based on NXP's newly JN516x series wireless microcontroller chip and supports ZigBee Pro network stack. The factory firmware wraps the complicated ZigBee stack operation into a few easy to use serial commands, and drives Mesh Bee into a transparent serial communication node that can be part of a simple point-to-point connection or a complex mesh network. Moreover, Mesh Bee is totally open hardware and open sourced, which means that you can customize the firmware on your requirements. You can use JN516x's ARM core to control things and JenOS to simplify your development. The development environment and tools from NXP are all free. Mesh Bee will bring you lots of fun.    Feature: ..
    S$37.90