Categories

ACCESSORIES

Sort By:
Show:
  • This Adjuster Stopper is Medium size, for rod 1.8mm in diameter.  **ALLEN KEY NOT INCLUDED.    ..
    S$7.00
  • Carbon Fiber Flat Bar
    Specifications: 1mm x 4mm x 1200mm ..
    S$5.50
  • Carbon Fiber Flat Bar
    Specifications: 1mm x 3mm x 1200mm ..
    S$5.50
  • 10 Pairs - 14.5cm JST Plug Connector Cable Male & Female For RC Lipo Battery
    10 Pairs - 14.5cm JST Plug Connector Cable Male & Female For RC Lipo Battery ..
    S$15.00
  • 100:1 Micro Metal Gearmotor MP
    This gearmotor is a miniature (0.94" x 0.39" x 0.47") brushed DC motor with 100:1 metal gearbox, similar to Sanyo’s popular 12 mm gearmotors. These units have a 0.365"-long, 3 mm-diameter D-shaped output shaft. Key specs at 6 V: 220 RPM and 40 mA free-run, 19 oz-in (1.4 kg-cm) and 0.7 A stall. Overview These tiny brushed DC gearmotors are intended for use at 6 V, though in general, these kinds of motors can run at voltages above and below this nominal voltage, so they should comfortably operate in the 3 – 9 V range (rotation can start at voltages as low as 0.5 V). Lower voltages might not be practical, and higher voltages could start negatively affecting the life of the motor. The micro metal gearmotors are available in..
    S$25.00
  • 12-Port USB Charger 12A 60WATT
    12-Port USB Charger 12-Port USB Charger power by SMART IC, auto identify device, maximize charging speed, Charge up to 12 USB-powered devices at the same time. Features: Powered by SMART IC, charger equipped with 12 ports that automatically identify your devices, and maximize charging speed Output: 12A Input: AC 100V~240V Charge up to 12 different devices (iPhone / iPad / Smartphone / Tablet / DC / MP3 / MP4 / PSP and other devices) at once Output: 0.5A ~ 3.5A automatic identification of charging Max output for single USB port 5V/3.5A Dimension: 170 x 74 x 36mm (approx.) Weight: 212g Package Contents: 1 x 12-Port USB Charger 1 x Power Cord ..
    S$65.00
  • 12V 10A AC/DC power supply adapter with UK Plug
    Regulated UK plug top power supply unit. 240 Volt AC Input, 12 Volt DC, 10A output. Use on LED Strip, CCTV  DVR standalone BOX; CCTV camera power adaptor. Fuse protection power lead include. It can be use for any other equipments which take DC 12v and Maximum 5amp with positive in 2.1 center hole with built-in Fan.   Color: Black Power input: AC 110-240 Volt Power output: DC 12 Volt Power output: Amp 10A Power output: Watts 120 Watts Polarity: Internal = + External = -   ..
    S$58.00
  • 12V 3A AC/DC power supply adapter with UK Plug
    Regulated UK plug top power supply unit. 240 Volt AC Input, 12 Volt DC, 3A output. Use on LED Strip, CCTV  DVR standalone BOX; CCTV camera power adaptor. 2.1 center hole, to be use with 1 to 4 way DC power cord splitter for four camera. Kettle power lead include. It can be use for any other equipments which take DC 12v and Maximum 5amp with positive in 2.1 center hole.   Color: Black Power input: AC 110-240 Volt Power output: DC 12 Volt Power output: Amp 3A Power output: Watts 36 Watts Polarity: Internal = + External = -   ..
    S$25.00
  • 12V 5A AC/DC power supply adapter with UK Plug
    Regulated UK plug top power supply unit. 240 Volt AC Input, 12 Volt DC, 5A output. Use on LED Strip, CCTV  DVR standalone BOX; CCTV camera power adaptor. 2.1 center hole, to be use with 1 to 4 way DC power cord splitter for four camera. Kettle power lead include. It can be use for any other equipments which take DC 12v and Maximum 5amp with positive in 2.1 center hole.   Color: Black Power input: AC 110-240 Volt Power output: DC 12 Volt Power output: Amp 5A Power output: Watts 60 Watts Polarity: Internal = + External = -   ..
    S$30.00
  • 150MM VERNIER CALIPER WITH WOODER BOX
    Instructions on use The Vernier caliper is an extremely precise measuring instrument; the reading error is 1/20 mm = 0.05 mm. Close the jaws lightly on the object to be measured. If you are measuring something with a round cross section, make sure that the axis of the object is perpendicular to the caliper. This is necessary to ensure that you are measuring the full diameter and not merely a chord. Ignore the top scale, which is calibrated in inches. Use the bottom scale, which is in metric units. Notice that there is a fixed scale and a sliding scale. The boldface numbers on the fixed scale are centimeters. The tick marks on the fixed scale between the boldface numbers are millimeters. There are ten tick marks on the sliding scale..
    S$12.00