Categories

DISPLAY

Sort By:
Show:
  • Basic 16x2 Character LCD - Amber on Black 3.3V
    Basic 16x2 Character LCD - Amber on Black 3.3V Description: This is a 16 character by 2 line display that runs at 3.3V. Utilizes the common ST7066/HD44780 parallel interface (datasheet). Interface code is widely available for many different controllers and systems. You will need ~11 general I/O pins to interface to this LCD screen. Includes amber LED backlight. Features: High quality STN 16x2 character LCD 3.3V power supply Amber LED Backlight 5x8 dot characters ST7066 controller 1/16 duty cycle Dimensions: 0.34 x 1.4 x 3.2" (8.6 x 36 x 80mm) Documents: LCD Datasheet ST7066 Datasheet mbed Example AVR Example Character Generator ..
    S$24.50
  • Basic 16x2 Character LCD - Black on Green 3.3V
    Basic 16x2 Character LCD - Black on Green 3.3V Description: This is a 16 character by 2 line display that runs at 3.3V. Utilizes the common ST7066/HD44780 parallel interface (datasheet). Interface code is widely available for many different controllers and systems. You will need ~11 general I/O pins to interface to this LCD screen. Includes yellow LED backlight. Features: High quality STN 16x2 character LCD 3.3V power supply Yellow LED Backlight 5x8 dot characters ST7066 controller 1/16 duty cycle Dimensions: 0.34 x 1.4 x 3.2" (8.6 x 36 x 80mm) Documents: LCD Datasheet ST7066 Datasheet mbed Example AVR Example Character Generator   ..
    S$23.90
  • Raspberry Pi LCD - 7" Touchscreen
    Raspberry Pi LCD - 7" Touchscreen Description: This 7" Raspberry Pi Touchscreen LCD provides you with the ability to create a standalone device that can be utilized as a custom tablet or an all-in-one interactive interface for a future project using your Raspberry Pi 3. Each LCD features a full color 800 x 480 capacitive touch display that connects to the Pi via an included adapter board which handles all of your power and signal conversion needs. An updated version of Raspbian OS on the A+, B+ and Pi2B is required for the display to work (the display does not work with the current version of Raspbian available on the Model A or B). What makes this LCD great is the fact that it only requires two connections to be hooked up to the Pi; power from the Pi’s GPIO port and a..
    S$140.54
  • SmartiPi Touch
    SmartiPi Touch Description: The SmartiPi Touch is a case and stand for the official Raspberry Pi 7" Touchscreen LCD. The display securely fits into the case with four screws, while a Raspberry Pi 2, 3, B+ or A+ is enclosed in the compartment on the back with a simple door. A ribbon cable that comes with the display connects into the Raspberry Pi DSI port. The stand has a pivot that allows you to adjust the angle of the screen for better viewing, as well as mounting points to affix it to a certain location. The SmartiPi Touch also includes a small case that houses your very own Raspberry Pi Camera Module, which can be attached via LEGO-compatible studs on the front or the back of the display case. Additionally, if you are looking to attach any HATs to the Rasp..
    S$47.90