Sort By:
  • Arduino Prototype Development Shield
    This shield works with Arduino to build and test prototype circuits. All pin connections are designed to be compatible with Arduino. Specs: Dimensions: 57x32x9mm Weight: 5.9g..
  • Battery Monitor 2-6S
    Simple & easy to use! A perfect solution for when youre at the field and not sure if your battery is charged! The BMON6 plugs into your battery balance plug and will quickly tell you the total voltage as well as each cells individual voltage.  ..
  • Carbon Fiber Flat Bar
    Specifications: 1mm x 3mm x 1200mm ..
  • Carbon Fiber Flat Bar
    Specifications: 1mm x 6mm x 1200mm ..
    A control horn is a section of control surface which projects ahead of the pivot point. It generates a force which tends to increase the surface's deflection thus reducing the control pressure experienced by the pilot. Control horns may also incorporate a counterweight which helps to balance the control and prevent it from "fluttering" in the airstream. Some designs feature separate anti-flutter weights.  ..
  • Two LED PCB Strobe Blue and Continuous White 3.3~5.5V
    This LED PCB features a blue strobe LED and a continuous white LED. These LEDs are ultra-bright and easy to use. Simply mount the PCB to your model and connect the wire lead to a 3.3~5.5V DC power source. Features a pre-installed JR style plug for easy "plug and play" compatibility with most standard receivers. Specs: Power Supply: 3.3~5.5V DC Consumption Current, ON Mode: 25mA Consumption Current, OFF Mode: 1mA ON/OFF Control: PWM, 1520uS Colors: Blue/White Dimensions: 51x18x7mm Weight: 6g..
  • 100:1 Micro Metal Gearmotor MP
    This gearmotor is a miniature (0.94" x 0.39" x 0.47") brushed DC motor with 100:1 metal gearbox, similar to Sanyo’s popular 12 mm gearmotors. These units have a 0.365"-long, 3 mm-diameter D-shaped output shaft. Key specs at 6 V: 220 RPM and 40 mA free-run, 19 oz-in (1.4 kg-cm) and 0.7 A stall. Overview These tiny brushed DC gearmotors are intended for use at 6 V, though in general, these kinds of motors can run at voltages above and below this nominal voltage, so they should comfortably operate in the 3 – 9 V range (rotation can start at voltages as low as 0.5 V). Lower voltages might not be practical, and higher voltages could start negatively affecting the life of the motor. The micro metal gearmotors are available in..
  • 100mm Mecanum Wheel Set (2x Left, 2x Right)
    Description • Number of rollers / plates each wheel: 9 / 2 • Body material: aluminium alloy • Roller material: rubber • Spacer material: nylon • A set of mecanum wheels including 4 pieces of wheels Nexus Robot introduces the 100mm Mecanum Wheel Set (2x Left, 2x Right). The mecanum wheels are design for a wheel which can move in any direction. The angled peripheral rollers translate a portion of the force in the rotational direction of ht wheel to a force normal to the wheel direction. Depending on each individual wheel direction and speed, the resulting combination of all these forces produce a total force vector in any desired direction. This kit is made up of 2x 100mm Left Mecanum Wheel and ..
  • 128x64 Graphic LCD
     Introduction This is a 128x64 liquid crystal display that support Chinese character ,  English characters and even graphics, very suitable for interactive work with Arduino.   Specifications Voltage: 5V With Chinese font Blue backlit Controller: ST7920 Size: 93x70mm   Documents Setting Pixels for ST7920 based 128x64 LCD Data sheet for ST7920 Arduino library v1.0 for serial mode Arduino library v1.0 for parallel mode   ..
  • 2 pin dual-female jumper wire - 300mm (10 PCs pack)