Sort By:
  • Mesh Bee - Open Source Zigbee Pro Module with MCU (JN5168)
    Mesh Bee is a 2.4GHz wireless transceiver from seeed studio. It's based on NXP's newly JN516x series wireless microcontroller chip and supports ZigBee Pro network stack. The factory firmware wraps the complicated ZigBee stack operation into a few easy to use serial commands, and drives Mesh Bee into a transparent serial communication node that can be part of a simple point-to-point connection or a complex mesh network. Moreover, Mesh Bee is totally open hardware and open sourced, which means that you can customize the firmware on your requirements. You can use JN516x's ARM core to control things and JenOS to simplify your development. The development environment and tools from NXP are all free. Mesh Bee will bring you lots of fun.    Feature: ..
  • SparkFun XBee Shield
    Description: Xbee radios are an awesome way to add wireless capability to your Arduino project and now it’s even easier with the SparkFun XBee Shield. The shield form-factor mates directly with any dev board that has an Arduino standard footprint and equips it with wireless communication capabilities using the popular XBee module. This unit works with all XBee modules including the Series 1 and 2, standard and Pro versions. The serial pins (DIN and DOUT) of the XBee are connected through an SPDT switch, which allows you to select a connection to either the UART pins (D0, D1) or any digital pins on the Arduino (D2 and D3 default). Power is taken from the 5V pin of the Arduino and regulated on-board to 3.3VDC before being supplied to the XBee. The shield also takes care of level..
  • UartSBee V5
    UartSBee v5' is FTDI cable compatible USB to Serial adapter equipped with BEE socket(20pin 2.0mm). The integrated FT232RL can be used for programming or communicating with MCUs. On the other hand, you might connect your PC to various wireless applications via a Bee compatible module. UartSBee provides breakouts for the bit-bang mode pins of FT232RL as well.This Bit-bang mode pins (8 I/O pins) can be used as a replacement for applications involving PC parallel port which is scares now a day.   UartSBee v5 is the Mesh Bee programmer version based on UartSBee v4.    Feature: FTDI Cable compatible. USB 2.0 compatible Serial Interface. 3.3V and 5V compatible I/Os. 3.3V and 5V dual power output..
  • Xbee USB adapter
    Introduction The DFRobot Xbee USB adapter is used for the XBee module configuration parameters to facilitate or to use as a wireless data transmission. It can be easily connected to a PC via mini USB cable. Further, it has XBee-setting support software X-CTU. It can also be used as a USB-TTL adapter.   Features  Used for the XBee module configuration parameters  Easily connected to a PC via mini USB cable  XBee-setting support software X-CTU  Also used as a USB-TTL adapter  Voltage: +5V(USB Power) ..
  • Zigbee / 802.15.4 Modules XBee ZB w/WiredWhip AT Router F/W (MESH)
      Manufacturer:           Digi International   Product Category:    Zigbee / 802.15.4 Modules   RoHS:     Frequency Band:          2.4 GHz   Line of Sigh..
  • ZigBee core board, features the CC2530F256 onboard, a true System-on-Chip solution for ZigBee applications
    Overview Core2530 is a ZigBee core board based on CC2530F256.     CC2530F256RHAR Features Frequency range: 2.4GHz 16 transfer chains, software configurable according to environmental conditions Radio baud rate up to 250kbps High-Performance and Low-Power 8051 microcontroller core with code prefetch 2.4-GHz IEEE 802.15.4 compliant RF transceiver Wide supply-voltage range (2 V–3.6 V) Watchdog timer, battery monitor, and temperature sensor 12-Bit ADC with 8 channels and configurable resolution 2 powerful USARTs with support for several serial protocols IR generation circuitry General-Purpose timers (One 16-Bit, Two 8-Bit) AES security coprocessor 21 General-Purpose I/O pins (19 × 4 m..
  • ZigBee mother board, provides I/O expansion connectors and various interfaces
    Overview ZB500 is a ZigBee mother board that features expansion connectors for connecting ZigBee core board and accessories. ZB500 provides an easy way to set up ZigBee development system.     What's On Board ZigBee core board connector: for easily connecting ZigBee core boards I/Os interface USB interface UART/SPI interface ONE-WIRE interface Debugging interface 5V DC jack Power pin headers: input/output AMS1117-3.3 PL2303 Onboard crystal oscillator Power switch Power indicator User LEDs User keys Reset button     Photos ZB500 ZigBee mother board ZB500 ZigBee mother board back view Connecting with a ..