Categories

NI

Sort By:
Show:
  • High Current Adapter for NI myRIO
    High Current Adapter for NI myRIO With the High Current Adapter, you can use your NI myRIO to interact with high current applications such as driving LED Strips, relays, and servos. The High Current Adapter is able to run applications from 3V-16V and can deliver current up to 4A, providing users with a way to plug their applications in directly without any additional electronics required.   Uses the myRIO Expansion Port (MXP) connector Supports 3V - 16V output voltage (external power supply required) 4 Open drain outputs Continuous current: 3.0A (25°C) / 2.2A (85°C) Peak output current: 4.1A (t<5s) 4 Standard 3 terminal relay outputs Common, Normally Closed, Normally Open ..
    S$169.00
  • Motor Adapter for NI myRIO
    The Motor Adapter for NI myRIO allows you to easily connect and control either one stepper motor, two DC motors or two servos independently through the MXP connector on your myRIO. It has been designed so that no additional circuitry is required. Just supply power and you're on your way! Servo motors are connected via standard 3 pin headers while DC motors are connected via 6-pin or screw terminal connectors and stepper motors are connected using screw terminals. Two quadrature encoder inputs are accessible through the motor connector or through terminal blocks. Uses the myRIO Expansion Port (MXP) connector Can be configured to work with 2 DC motors, 1 stepper motor, or 2 RC servos Current control and sensing built in 6V-16V input voltage ..
    S$299.00
  • MXP Breadboard for NI myRIO
    MXP Breadboard for NI myRIO The MXP Breadboard provides a 300 tie breadboard & 50 tie bus bar on an expansion card compatible with the myRIO Expansion Port (MXP). The MXP Breadboard functions as an I/O breakout, with digital and analog signals mapped to two headers on either side of the breadboard itself. The MXP Breadboard's connector is also keyed to ensure correct connection with your NI myRIO. For more information on the NI myRIO, please visit www.ni.com/myrio ..
    S$138.00
  • NI myRIO Embedded Systems Accessory Kit
    NI myRIO Embedded Systems Accessory Kit Product Description Support Materials NI myRIO Project Essentials The NI myRIO Embedded Kit contains common sensors, devices, and a display. Most of the products within the kit are also available for separate purchase.  Kit contents: PmodBT2 (410-214): Bluetooth interface PmodCLS (410-092): LCD display, serial I/F PmodDPOT (410-239): Digital potentiometer PmodKYPD (410-195): 16-button keypad PmodTMP3 (410-287): Temperature sensor UART Crossover Cable (240-047): 6-pin, 6" crossover cable Pmod Cable kit: 6" 6-pin Pmod cable Pmod Cable Kit: 6", 12-pin Pmod cable MTE Cable (250-061): 4-pin to..
    S$482.50
  • NI myRIO Mechatronics Accessory Kit
    NI myRIO Mechatronics Accessory Kit Product Description Support Materials NI myRIO Project Essentials The NI myRIO Mechatronics Accessory Kit includes a variety of commonly used motors, sensors, and components. These products are also available for separate purchase.  Kit contents: PmodACL (410-097): 3-axis accelerometer PmodALS (410-286): Ambient light sensor PmodCMPS (410-285): 3-axis digital compass PmodGYRO (410-215): 3-axis digital gyroscope PmodHB5 (410-106): H-bridge driver with feedback inputs PmodMAXSONAR (240-071): Maxbotix ultrasonic range finder Infrared proximity sensor (240-037): 10 cm to 80 cm GWS Servo (290-010): S03TXF STD&..
    S$655.00
  • NI myRIO Panel Mount Kit
    The NI myRIO Panel Mount Kit helps you quickly mount NI myRIO to a wall or integrate it in a project design. Created specifically for NI myRIO, the metal mounting panel allows NI myRIO to snap into place and be held securely. ..
    S$56.60
  • NI myRIO Starter Accessory Kit
    NI myRIO Starter Accessory Kit Product Description Support Materials NI myRIO Project Essentials The NI myRIO Starter Accessory Kit includes everything you need to get started connecting to and programming the I/O of NI myRIO. Kit Contents: Barrel connector with leads Assorted capacitors Diodes 7-segment display Mechanical rotary encoder Photo interruptor (light sensor with LED)  Assorted op-amps Assorted LEDs  Small DC motor (1 VDC to 3 VDC, no load speed: 6600 rpm)  Microphone with audio jack MXP Breadboard (210-283): Breadboard expansion for NI myRIO 1-pin MTE cables (240-005): 5-pack MTE cables Potentiometer (500 kΩ)..
    S$350.00
  • NI USB-6008/6009 ACCESSORIES
    ACCESSORIES FOR USB 6008/6009 CONTENT : 4 CONNECTORS, 2 LABELS AND 1 SCREW DRIVER. L/T : 2 ~ 3 WEEKS ARO! ..
    S$74.60
  • Shield Adapter for NI myRIO
    Shield Adapter for NI myRIO With the Shield Adapter for NI myRIO, you can now connect your myRIO to the expansive shield options offered by the Arduino™ ecosystem. The Shield Adapter is designed to work with any shield that is compatible with the Arduino Uno using the 3.3 or 5V power from the myRIO MXP connector. The silk screen is labeled on the shield pins to reflect the myRIO inputs. Some design details:   A switch has been included to allow users to switch between UART and Digital I/O (pins 0 and 1 on the Arduino). PWM is supported on pins 3, 5, and 6 and is underlined on silk screen for easy identification.    ..
    S$139.00
  • WorldSkills NI myRIO (For Academic Purchase Only - upon approval)
    WorldSkills NI myRIO  NI myRIO, industry-standard reconfigurable I/O (RIO) technology, the enclosed version of myRIO (myRIO-1900) places three I/O connectors, wireless capabilities, a dual-core ARM real-time processor, and a customizable Xilinx FPGA in the hands of students. With its onboard devices, seamless software experience, and library of courseware and tutorials, myRIO provides a controller ideal for the WorldSkills Mobile Robotics Competition. Purchase Only: Includes WIFI and MSP Connector. (Can only be purchased for use with the WorldSkills Mobile Robotics Competition and Academic  - upon NI approval)           ..
    S$980.00