Categories

ARDUINO.ORG

Sort By:
Show:
  • ARDUINO ETHERNET REV3 WITHOUT POE
    The Arduino Ethernet is a microcontroller board based on the ATmega328. It has 14 digital input/output pins, 6 analog inputs, a 16 MHz crystal oscillator, a RJ45 connection, a power jack, an ICSP header, and a reset button. NB: Pins 10, 11, 12 and 13 are reserved for interfacing with the Ethernet module and should not be used otherwise. This reduces the number of available pins to 9, with 4 available as PWM outputs. An optional Power over Ethernet module can be added to the board as well. The Ethernet differs from other boards in that it does not have an onboard USB-to-serial driver chip, but has a Wiznet Ethernet interface. This is the same interface found on the Ethernet shield. An onboard microSD card reader, which can be used to store fi..
    S$83.90
  • ARDUINO M0 PRO
    With the new Arduino M0 Pro board, the more creative individual will have the potential to create one’s most imaginative and new ideas for IoT devices, wearable technologies, high tech automation, wild robotics and other not yet thinkable adventures in the world of makers. The Arduino M0 pro represents a simple, yet powerful, 32-bit extension of the Arduino UNO platform. The board is powered by Atmel’s SAMD21 MCU, featuring a 32-bit ARM Cortex® M0 core. With the addition of the M0 board, the Arduino family becomes larger with a new member providing increased performance. The power of its Atmel’s core gives this board an upgraded flexibility and boosts the scope of projects one can think of and make; moreover, it makes the M0 Pro the ideal educational tool for learning abou..
    S$75.00
  • ARDUINO MICRO
    The Micro is a microcontroller board based on the ATmega32U4 (datasheet), developed in conjunction with Adafruit. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a micro USB cable to get started. It has a form factor that enables it to be easily placed on a breadboard. The Micro board is similar to the Arduino Leonardo in that the ATmega32U4 has built-in USB communication, eliminating the need for a secondary processor. This allows the Micro to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / CO..
    S$39.00
  • Arduino Mini 05
    The Arduino Mini 05 is a small microcontroller board originally based on the ATmega168, but now supplied with the 328.(datasheet), intended for use on breadboards and when space is at a premium. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 8 analog inputs, and a 16 MHz crystal oscillator. It can be programmed with the USB Serial adapter or other USB or RS232 to TTL serial adapter. The new Mini (revision 05) has a new package for the ATmega328, which enables all components to be on the top of the board. It also has an onboard reset button. The new version has the same pin configuration as revision 04. Warning: Don't power the Arduino mini with more than 9 volts, or plug the power in backwards: you'l..
    S$23.90
  • Arduino Tian
    Arduino Tian The new Arduino Tian board is powered by Atmel’s SAMD21 MCU, featuring a 32-bit ARM Cortex® M0+ core and a Qualcomm Atheros AR9342, which is an highly integrated MIPS processor operating at up to 560MHz and feature-rich IEEE802.11n 2x2 2.4/5 GHz dual-band WiFi module. Qualcomm Atheros MIPS supports a Linux distribution, based on OpenWRT named Linino. The Arduino Tian has also a build in 4GB eMMC memory that will can be helpful to build your projects. It is possible to Switch ON/OFF the Linux port from the MCU to reduce the power consumption.    NB: In some countries, it is prohibited to sell WiFi enabled devices without government approval. While waiting for proper certification, some local distributors are disabling WiFi functionality. Check ..
    S$129.00
  • Arduino UNO R3
    AEDUINO UNO R3 Overview 5V   8-bit   16 MHz   AVR Arduino/Genuino Uno is a microcontroller board based on the ATmega328P (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz quartz crystal, a USB connection, a power jack, an ICSP header and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.. You can tinker with your UNO without worring too much about doing something wrong, worst case scenario you can replace the chip for a few dollars and start over again. "Uno" means one in Italian and was chosen to mark the releas..
    S$39.00
  • Arduino UNO SMD
    The Arduino Uno SMD R3 is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Uno differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Additional features coming with the R3 version are: - ATmega16U2 instead 8U2 as USB-to-Serial converter. - 1.0 pinout: added SDA and SCL pins for TWI communication placed near to the AREF pin and two other ..
    S$45.00
  • Arduino USB to Serial Converter
    Description • USB serial adapter with onboard mini-USB connector • Converts a USB connection into a 5 volt Serial TX and RX • Easily connects to the Arduino Ethernet, Mini, Pro Mini (5V), LilyPad, LilyPad Simple, and Fio • Onboard polyfuse to protects host computer from short circuits. The Arduino USB to Serial Converter converts a USB connection into a 5 volt Serial TX and RX that you can connect straight to the Arduino Mini, Arduino Ethernet or other microcontrollers, allowing them to talk to the computer. It features an Atmega8U2 programmed as a USB-to-serial converter, the same chip found on the Arduino Uno. The '8U2 firmware uses the standard USB COM drivers, and no external driver is needed. The USB Serial Adapter has an onboard min..
    S$19.90
  • ARDUINO WIRELESS PROTO SHIELD
    The Wireless Proto shield allows an Arduino board to communicate wirelessly using a wireless module. It is based on the Xbee modules from Digi, but can use any module with the same footprint. The module can communicate up to 100 feet indoors or 300 feet outdoors (with line-of-sight). It can be used as a serial/usb replacement or you can put it into a command mode and configure it for a variety of broadcast and mesh networking options. The shields breaks out each of the Xbee's pins to a through-hole solder pad. This shield doesn't have the SD socket. An on-board switch allows the wireless module to communicate with the USB-to-serial converter or with the microcontroller. ..
    S$38.00
  • Arduino YUN mini
    Arduino YUN mini The Arduino Yún mini is a board based on the ATmega32u4 microcontroller and the Atheros AR9331  processor. It’s the small version of the Arduino Yun.   Microcontroller ATmega32u4 Operating Voltage 5V Input Voltage 5V Digital I/O Pins 20 PWM Channels 7 Analog input channels 12 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory 32 KB SRAM 2.5 KB EEPROM 1 KB Clock Speed 16 MHz     Linux Processor   Processor Atheros AR9331, MIPS 24K processor operating at up to 400 MHZ WiFi IEEE 802.11b/g/n RAM 64 MB DDR2 Flash Memory 16 MB Operating Voltage 3.3 V typ.380mA (113~570 mA) Input Voltage 4.75~5.25 V/1A Temperature Operat..
    S$100.00