Categories

BOARDS

Sort By:
Show:
  • ARDUINO ETHERNET REV3 WITHOUT POE
    The Arduino Ethernet is a microcontroller board based on the ATmega328. It has 14 digital input/output pins, 6 analog inputs, a 16 MHz crystal oscillator, a RJ45 connection, a power jack, an ICSP header, and a reset button. NB: Pins 10, 11, 12 and 13 are reserved for interfacing with the Ethernet module and should not be used otherwise. This reduces the number of available pins to 9, with 4 available as PWM outputs. An optional Power over Ethernet module can be added to the board as well. The Ethernet differs from other boards in that it does not have an onboard USB-to-serial driver chip, but has a Wiznet Ethernet interface. This is the same interface found on the Ethernet shield. An onboard microSD card reader, which can be used to store fi..
    S$83.90
  • ARDUINO M0 PRO
    With the new Arduino M0 Pro board, the more creative individual will have the potential to create one’s most imaginative and new ideas for IoT devices, wearable technologies, high tech automation, wild robotics and other not yet thinkable adventures in the world of makers. The Arduino M0 pro represents a simple, yet powerful, 32-bit extension of the Arduino UNO platform. The board is powered by Atmel’s SAMD21 MCU, featuring a 32-bit ARM Cortex® M0 core. With the addition of the M0 board, the Arduino family becomes larger with a new member providing increased performance. The power of its Atmel’s core gives this board an upgraded flexibility and boosts the scope of projects one can think of and make; moreover, it makes the M0 Pro the ideal educational tool for learning abou..
    S$75.00
  • ARDUINO MICRO
    The Micro is a microcontroller board based on the ATmega32U4 (datasheet), developed in conjunction with Adafruit. It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a micro USB cable to get started. It has a form factor that enables it to be easily placed on a breadboard. The Micro board is similar to the Arduino Leonardo in that the ATmega32U4 has built-in USB communication, eliminating the need for a secondary processor. This allows the Micro to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / CO..
    S$39.00
  • Arduino Mini 05
    The Arduino Mini 05 is a small microcontroller board originally based on the ATmega168, but now supplied with the 328.(datasheet), intended for use on breadboards and when space is at a premium. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 8 analog inputs, and a 16 MHz crystal oscillator. It can be programmed with the USB Serial adapter or other USB or RS232 to TTL serial adapter. The new Mini (revision 05) has a new package for the ATmega328, which enables all components to be on the top of the board. It also has an onboard reset button. The new version has the same pin configuration as revision 04. Warning: Don't power the Arduino mini with more than 9 volts, or plug the power in backwards: you'l..
    S$23.90
  • Arduino PRIMO
    Arduino PRIMO  The Primo is the first Arduino board featuring a Nordic nRF52 processor with WiFi. The Arduino Primo combines the processing power from the Nordic nRF52 processor, an Espressif ESP8266 for WiFi, as well as several on-board sensors and a battery charger.  The nRF52 includes NFC (Near Field Communication) and Bluetooth Smart.  The sensors include an on-board button, LED and infrared receiver and transmitter. The Arduino Primo is the first board developed in cooperation with Nordic Semiconductor. It brings new benefits for the IoT world all on one platform: advanced 32-bit microcontroller architecture, bluetooth low energy (BLE), Wi-Fi, near-field communications (NFC), and infrared (IR) transmit and receive capability. There are three on..
    S$88.00
  • Arduino PRIMO CORE
    Arduino PRIMO CORE  Primo Core is a low-power coin-sized version of the Primo, ideal for wearables The Primo Core is a compact Bluetooth device, using a Nordic nrf52832 chip with an integrated motion and environmental sensors. The low power consumption permits powering the Primo Core with a coin cell battery. The Arduino Primo Core can be mounted on a breakout board to extend its functionalities.     Arduino PRIMO - the Evolution board of the UNO, low cost IoT board using nRF52832. The Arduino Primo features native Bluetooth Smart wireless connectivity and NFC, through the Nordic Semiconductor nRF52832 Bluetooth® Smart System-on-Chip (SoC). The platform also includes Wi-Fi and infrared technologies. This allows IoT developers to create inspirin..
    S$68.00
  • Arduino Tian
    Arduino Tian The new Arduino Tian board is powered by Atmel’s SAMD21 MCU, featuring a 32-bit ARM Cortex® M0+ core and a Qualcomm Atheros AR9342, which is an highly integrated MIPS processor operating at up to 560MHz and feature-rich IEEE802.11n 2x2 2.4/5 GHz dual-band WiFi module. Qualcomm Atheros MIPS supports a Linux distribution, based on OpenWRT named Linino. The Arduino Tian has also a build in 4GB eMMC memory that will can be helpful to build your projects. It is possible to Switch ON/OFF the Linux port from the MCU to reduce the power consumption.    NB: In some countries, it is prohibited to sell WiFi enabled devices without government approval. While waiting for proper certification, some local distributors are disabling WiFi functionality. Check ..
    S$129.00
  • Arduino Uno R3 w/Holder (Italy) + 1.8M USB Cable
    Arduino Uno R3 w/Holder (Italy) + 1.8M USB Cable Product Overview A000066 Arduino Uno is a microcontroller board based on the ATmega328. It has 14 digital io pins, 6 analogue inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header and a reset button. It contains everything needed to support the microcontroller, simply connect it to a computer with a USB cable or power it with a AC to DC adapter or battery to get started. The Uno differs from all preceding boards in that it does not use the FTDI USB to serial driver chip. Instead, it features the ATmega16U2 programmed as a USB to serial converter. Microcontroller Atmel ATmega328 Operating voltage of 5V Maximum supply voltage 6 to 20V Digital..
    S$42.00
  • Arduino UNO SMD
    The Arduino Uno SMD R3 is a microcontroller board based on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Uno differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Additional features coming with the R3 version are: - ATmega16U2 instead 8U2 as USB-to-Serial converter. - 1.0 pinout: added SDA and SCL pins for TWI communication placed near to the AREF pin and two other ..
    S$45.00
  • Arduino USB to Serial Converter
    Description • USB serial adapter with onboard mini-USB connector • Converts a USB connection into a 5 volt Serial TX and RX • Easily connects to the Arduino Ethernet, Mini, Pro Mini (5V), LilyPad, LilyPad Simple, and Fio • Onboard polyfuse to protects host computer from short circuits. The Arduino USB to Serial Converter converts a USB connection into a 5 volt Serial TX and RX that you can connect straight to the Arduino Mini, Arduino Ethernet or other microcontrollers, allowing them to talk to the computer. It features an Atmega8U2 programmed as a USB-to-serial converter, the same chip found on the Arduino Uno. The '8U2 firmware uses the standard USB COM drivers, and no external driver is needed. The USB Serial Adapter has an onboard min..
    S$19.90