Categories

Cytron

Sort By:
Show:
  • 10 Amp DC Motor Driver
    10 Amp DC Motor Driver MD10C is a newer version of the MD10B which is designed to drive high current brushed DC motor up to 10A 13A continuously.  It offers several enhancements over the MD10B such as support for both locked-antiphase and sign-magnitude PWM signal as well as using full solid state components which result in faster response time and eliminate the wear and tear of the mechanical relay.   Read User's Review: http://www.robotshop.com/en/cytron-13a-5-30v-single-dc-motor-controller.html   **Note that it is not for "RC PWM"    *MD10C is now Revision 3.0. * Rev 3.0 can support motor voltage range from 5V to 30V  Features: Bi-directional control for 1 br..
    S$19.00
  • 13Amp DC Motor Driver - GROVE Compatible
    13Amp DC Motor Driver - GROVE Compatible Brush motor is the most used motor world wide because of the ease of operation. Just supply two terminals of brush motor with DC voltage, it will start rotating! Yet, you need a good motor driver to control the speed and direction from a microcontroller. MD10C is a great motor driver and now it is already in Revision 3. Anyway, we would like to introduce MD13S where the S stands for SMD (Surface Mount Device) MD13S has great improvement in current protection which MD10C does not have. With new circuit and design, MD13S is able to output current to 30A max. And the continuous current is at 13A (in room temperature of 25 degreeC). Not to forget it is GROVE compatible, so get yourself a Grove shield. Oh..
    S$16.00
  • Breakout Board for SPG10 DC Motor
    Breakout Board for SPG10 DC Motor With this breakout board, your SPG10 DC brush motor will have a secure and robust power cable :)   We designed this breakout board specifically for SPG10 DC brush motor as we know the trouble when you want to solder the wire to tiny terminals rear of the motor, and most of the time it will be tangling around. Soon, the wire will drops from terminal.   We know it is difficult and we want to make it easy for everyone! The breakout will need 1 minute of soldering :) and the terminal is extended out with ready cable/wire. The cable/wire (2 ways) is included, ready with the proper jack for the breakout.   Features: Designed to fit SPG10 DC brushed motor Tiny, compact an..
    S$3.00
  • Cytron 10A Motor Driver Shield (Arduino)
    Cytron 10A Motor Driver Shield (Arduino) Cytron 10A Motor Driver Shield (Arduino)"SHIELD-MD10" is a compatible Arduino motor shield for controlling high current brushed DC motor up to 10A continuously. It is compatible with Arduino UNO, Arduino Duemilanove, Arduino Mega, Arduino Leonardo, CT-UNO and possibly other pin compatible main boards.   Read User's Review: http://www.robotshop.com/en/10a-dc-motor-driver-arduino-shield.html   Cytron 10A Motor Driver Shield (Arduino)"SHIELD-MD10" uses full solid state components which results in faster response time and eliminates the wear and tear of the mechanical relay. It has stackable side headers which allows for more Arduino shields to be stacked on top..
    S$20.00
  • Cytron Easy MP3 Shield
    Cytron Easy MP3 Shield Here is another MP3 shield from Cytron, ezMP3 Shield is an Arduino compatible shield which is compatible with Genuino UNO, CT-UNO, CT-ARM, Genuino Mega and possibly other pin compatible main boards. Cytron ezMP3 Shield offers high quality audio solution with the ability to decode and play MP3 audio files from microSD card. Cytron ezMP3 Shield has stackable side headers which allows more Arduino shield to be stacked on top of it. User can stack for example LCD Keypad Shield or Graphic LCD Shield and utilize it as control panel for ezMP3 Shield. It has the on-board mircoSD socket for microSD card with MP3 files. Cytron ezMP3 Shield has also on board 2 channel differential amplifier for direct drive of extern..
    S$25.00
  • Cytron ESP8266 WiFi Shield
    Cytron ESP8266 WiFi Shield Because of IoT (Internet of Thing), everything is connected to Internet, a crucial element is WiFi that provide wireless connection to Internet. We have been carrying ESP module and many have used it. However it is not user friendly enough for beginner. The module is 3.3V powered and the pins are not properly broken out. Intergrating it to PIC or Arduino will require some skill and electronics interface.   With this ESP WiFi shield, it will be plug and use for Arduino user. The shield come preassembled with ESP8266-12 WROOM-02 module which offers WiFi connection to your Arduino board or project. No additional soldering or wiring needed, just stack the shield on to Genuino UNO, CT-ARM, CT-UNO, Genuino Meg..
    S$19.00
  • Cytron Servo Shield (5A)
    Cytron Servo Shield (5A) This is the 1st ever servo shield for Arduino that provide build in 5V and 5A output switching regulator.With this servo, you can supply 7V to 25V of power and it will regulate to 5V and 5A (Maximum) to power your favorite servo.  We believe the most troublesome feature of RC servo is the pulses and power. Shield-Servo offers reliable yet user friendly RC (Radio Control) Servo motor controller to hobbyist and students. Differ from SC16A and SC08A, the shield-Servo is designed to control 8 independent RC (Remote Control) Servo motors simultaneously in a single board with a built in 5V 5 Ampere switching regulator. Each Servo signal pin is able to generate Servo pulses with duty cycle from 0.5ms to 2.5ms, which is greater than the ..
    S$29.90
  • LiPo Power Shield
    LiPo Power Shield With this Lipo power shield, your Arduino can be fully standalone, no more USB cable or adapter for power. The shield itself is a battery charger (battery is sold separately) and designed to stack perfectly on Arduino UNO R3 or other compatible boards. It provides 5V power to your Arduino main board: Arduino UNO R3, CT-UNO, CT-UNO-SE, Arduino Mega, Leonardo and Due - basically any Arduino board that have similar layout as Arduino UNO. And the shield only uses the power pins which are the 5V and GND, the Li-po battery voltage monitor is optional, the Digital IO and Analog pins are free to be used by other shields.   It comes with 5V DC to DC booster, boosting the voltage of standard Li-po battery (3.0V to 4..
    S$20.00
  • Planetary DC Geared Motor (42mm) 4:1
    Planetary DC Geared Motor (42mm) 4:1 Pleanetary geared motor is always well known with its less backlash and higher efficiency characteristic to meet the higher requiment. This planetary geared motor is manufactured by an establish Taiwanese motor company to ensure the motor's quality and durability.   This 42mm diameter model is even more powerful than the 32mm models to fit your high torque needs. It also comes with a 5 pulses per rotation, single channel output to provide real time feedback on the rotating position.    Specification: Voltage: 12VDC Rated Torque: ~2.24 kg.cm (0.22 N.m)  Rated Speed: 140..
    S$65.00