1.75mm PLA (1kg) - Neon Green

1.75mm PLA (1kg) - Neon Green
  • Brand:

    DF ROBOT
  • Product Code:

    SG - P0292-NG
  • Availability:

    Pre-Order
  • Price:

    S$ 48.00

Qty


INTRODUCTION

This is 1.75mm PLA filament which is commonly used by reprap, Makerbot, Mendel, Huxley UP! Printer, WeisTek and Thing-o-matic  3D printers. It comes with one spool that can be easily attached on 3D printer. 
 
PLA is a wonderful filament. It is the most environmentally friendly material available for this type of 3D printing, and it comes in a wide range of colors.
Polylactic acid or polylactide (PLA) is a thermoplastic aliphatic polyester derived from renewable resources, such as corn starch ,tapioca roots, chips or starch, or sugarcane. It can biodegrade under certain conditions. 
 
As the extrusion head temperature will vary from 3D printer to 3D printer design, temperature differences will affect the result of your print, we suggest PLA use an optimal temperature range of 185℃ to 200℃. Please make the appropriate adjustments to temperature before you print with PLA, some testing might be required to find your optimal print settings.

SPECIFICATION

  • Diameters: 1.75mm
  • Weight:1kg
  • PLA Parameter
    • Physical Property: Typical value 
    • Tensile Strength@Yield: 46Mpa
    • Tensile Elongation@Break: 20%
    • Flexural Strength: 70Mpa
    • Flexural Modulus: 3212Mpa
    • Notched lzod lmpact(23℃): 5.2kj/㎡
    • HDT@66psi: 58℃
    • density: 1.31g/cm3
    • MFR: 10-14g/10min
    • Accuracy: A:3.00±0.1mm, B:1.75±0.1mm 

SHIPPING LIST

  • 1.75mm PLA (1kg) - Neon Green x1

 

Brands

GET THE LATEST NEWS DELIVERED DAILY

Give us your email and you will be daily updated with the latest events, in detail.