SPARKFUN Barometric Pressure Sensor - BMP085 Breakout
DESCRIPTION
Replacement:SEN-11282. We've made some minor hardware changes including the addition of a solder jumper to disable the I2C pull-ups.This page is for reference only.
This is a simple breakout board for the BMP085 high-precision, low-power barometric pressure sensor. The BMP085 offers a measuring range of 300 to 1100 hPa with an absolute accuracy of down to 0.03 hPa. It's based on piezo-resistive technology for EMC robustness, high accuracy and linearity as well as long term stability. This sensor supports a voltage supply between 1.8 and 3.6VDC. It is designed to be connected directly to a micro-controller via the I2C bus
This breadboard-friendly board breaks out all pins of the BMP085 to a 6-pin 0.1" pitch header. The analog and digital supplies (VDDD and VDDA) of the BMP085 are tied together and broken out to a single pin. We've also put two 4.7k pull-up resistors on the I2C lines.
FEATURES
- Digital two wire (I2C) interface
- Wide barometric pressure range
- Flexible supply voltage range
- Ultra-low power consumption
- Low noise measurement
- Fully calibrated
- Temperature measurement included
- Ultra-flat, small footprint* 0.65 x 0.65" (16.5 x 16.5 mm)
- [Schematic](http://cdn.sparkfun.com/datasheets/Sensors/Pressure/BMP085 Breakout-v11.pdf)
- [Eagle Files](http://cdn.sparkfun.com/datasheets/Sensors/Pressure/BMP085 Breakout-v11.zip)
- Datasheet (BMP085)
- Quickstart Guide
- Example Arduino Sketch
- [Example Code](http://www.sparkfun.com/datasheets/Sensors/Pressure/BMP085 Example Code.zip) (ATmega328)
- Product Flyer
- Wiring Example
- mbed User Review
- Bildr Tutorial
Tags: SPARKFUN Barometric Pressure Sensor - BMP085 Breakout, SF09694