POWER ADAPTER - 2.1MM JACK TO SCREW TERMINAL BLOCK
POWER ADAPTER - 2.1MM JACK TO SCREW TERMINAL BLOCK
This 2.1mm jack converts your regular 2 wires into a plug, allowing easy connection or disconnection between your power / signal.
Simply loosen the screw at the back and insert the wire, then tighten it to secure the wire in place.
Usually the positive is in the center pin, but do check your device / equipment to confirm.
This 2.1mm jack is most commonly used in CCTV, LEDs, routers and Arduino. Devices that requires 12/24V DC power most likely uses this jack.
TECHNICAL DETAILS
- Input Voltage (recommended): 3 - 36V
- Maximum Current: 5A
Tags: POWER, ADAPTER, 2.1MM, JACK, SCREW, TERMINAL, BLOCK, CONNECTOR, BATTERY