POWER ADAPTER - 2.1MM PLUG TO SCREW TERMINAL BLOCK
POWER ADAPTER - 2.1MM PLUG TO SCREW TERMINAL BLOCK
This 2.1mm plug converts your regular 2 wires into a socket, allowing easy connection or disconnection between your power / signal.
Simply loosen the screw at the back and insert the wire, then tighten it to secure the wire in place.
Usually the positive is in the center pin, but do check your device / equipment to confirm.
This 2.1mm plug is most commonly used in CCTV, LEDs, routers and Arduino. Devices that requires 12/24V DC power most likely uses this plug.
TECHNICAL DETAILS
- Input Voltage (recommended): 3 - 36V
- Maximum Current: 5A
Tags: POWER, ADAPTER, 2.1MM, PLUG, SCREW, TERMINAL, BLOCK, CONNECTOR, BATTERY