RASPBERRY PI 10.1 INCH CAPACITIVE TOUCH SCREEN LCD (B) WITH CASE
RASPBERRY PI 10.1 INCH CAPACITIVE TOUCH SCREEN LCD (B) WITH CASE
INTRODUCTION
- 10.1-inch IPS screen, hardware resolution is 1280 × 800.
- 10-point capacitive touch control, tempered glass panel, hardness up to 6H.
- When used with Raspberry Pi, supports Raspberry Pi OS / Ubuntu / Kali and Retropie.
- When used as a computer monitor, supports Windows 11/10/8.1/8/7.
WORKING WITH PC
This Support PC version Windows 11/10/8.1/8/7 system.
Instructions:
- Connect the Power Only port of the touch screen to a 5V power adapter.
- Use a type A to micro USB cable to connect the Touch interface of the touch screen and any USB interface of the PC.
- Connect the touch screen and the HDMI port of the PC with an HDMI cable. After about a few seconds, you can see the LCD display normally.
- Note 1: Please pay attention to connecting cables in order, otherwise it may not display properly.
- Note 2: When the computer is connected to multiple monitors at the same time, the cursor on the main monitor can only be controlled through this LCD, so it is recommended to set this LCD as the main monitor.
Related Products
Tags: RASPBERRY PI 10.1 INCH CAPACITIVE TOUCH SCREEN LCD (B) WITH CASE