SW-520 TILT SWITCH
Feature:
1,the switch is manufactured using metal , mercury switches and electrical characteristics are similar but not dangerous
mercury switches and environmental issues , and when shaking single pass of the same characteristics as the wizard , the
assembly is more convenient and safe to use ;
2,the operating characteristics : in the rest state the switch , as shown in (ON) below the level of the end of 15 degrees ,
the switch is in the ON state ; when the (OFF) side lower than 15 degrees , the switch is in OFF state ; when reached by
external shaking forces and shaking , or conduction angle set in the range of electrical characteristics of the conductive pin
will produce short or continuous conduction .
3,when the electrical characteristics of the open state to be restored (OFF), switch to set the environment must be static,
and (OFF) below the level required to set up the open end angle ;
4,the switch all the materials used are environmentally friendly raw materials.
5,when the switch is OFF side angle of 15 degrees below the horizontal , while shaking difficult to trigger conduction ;
6,the trigger switch for low current circuit , does not apply when the power switch ;
7, this switch is a sealed package, dustproof, waterproof ;
8 ,the ball switch series switch conduction best results, the highest sensitivity .
Tags: SW-520 TILT SWITCH