EE-SPY401 OPTICAL SENSOR TRANSMISSIVE / SLOTTED INTERRUPTER
EE-SPY401 OPTICAL SENSOR TRANSMISSIVE / SLOTTED INTERRUPTER
Modulated Diffuse reflective type, Horizontal type Appearance, Connector type, Sensing distance 5 mm, Light-ON, NPN Voltage output
| Appearance | Horizontal type |
|---|---|
| Luminous method | Modulated |
| Sensing method | Diffuse reflective type |
| Sensing distance |
5 mm (Reflection factor: 90%; white paper 15 x 15 mm) Note: Operation may not be possible near the Sensor. |
| Operation mode | Light-ON |
| Control output （Output type） | NPNVoltage output |
| Connection method | Connector type（soldering not possible ） |
| Appearance | Horizontal type |
|---|---|
| Luminous method | Modulated |
| Sensing method | Diffuse reflective type |
| Sensing distance |
5 mm (Reflection factor: 90%; white paper 15 x 15 mm) Note: Operation may not be possible near the Sensor. |
| Operation mode | Light-ON |
| Differential distance elements | 0.2 mm max. (with a sensing distance of 3 mm, horizontally) |
| Light source （Peak wavelength） | GaAs infrared LED |
| Indicator | Light indicator (red) |
| Power supply voltage | 5 to 24V ±10% (ripple (p-p)5% max.) |
| Current consumption |
Average: 15 mAmax. Peak: 50 mAmax. |
| Control output （Output type） | NPNVoltage output |
| Control output （Load power supply voltage） | 5 to 24 V |
| Control output （Load current） | 80 mAmax. |
| Control output （Residual voltage） |
1.0 Vmax. (at 80 mA load current) 0.4 Vmax. (at 10 mA load current) |
| Response frequency elements |
500 Hzmin. （See "Measurement condition of Response frequency elements"） |
| Illumination on the surface receiver | 3000 lx max. (Incandescent light, sunlight) |
| Ambient temperature |
Operating: -10 to +55℃ Storage: -25 to +65℃ （with no icing or condensation） |
| Ambient humidity |
Operating: 5 to 85% Storage: 5 to 95% （with no icing or condensation） |
| Vibration resistance | 10 to 55 Hz, 1.5 mm double amplitude for 2 h |
| Shock resistance | 500 m/s**2 for 3 times each in X, Y, and Z directions |
| Degree of protection （IEC60529） | IP50 |
| Connection method | Connector type（soldering not possible ） |
| Weight | Approx. 2.6 g |
| Material | Case: Polycarbonate(PC) |