CP2102 USB 2.0 TO UART TTL 6 PIN

CP2102 USB 2.0 TO UART TTL 6 PIN

CP2102 Introduction :

CP2102 is a USB to serial chip , compact and does not require any peripheral components to be enough as a
simple USB-UART program , communication speed up to 1Mbps, it is easy to upgrade the product to a USB
serial port , but due to its small size , but it is also MLP package, there are some technical difficulty of welding ,
so the owner has designed this compact USB-UART module , leads interfaces include 5V, 3.3V, TXD, RXD, GND,
which TXD, RXD can be directly connected MCU serial port, convenient for debugging initial product , even 3.3V
systems can also take power from the module ( less than 100mA), LED display module is powered and working
properly.
Single- chip USB to UART data converters :
  - Integrated USB transceiver without external resistors
  - Integrated clock without external oscillator
  - The integrated 512-byte EEPROM for vendor code for the product code serial number plate power version number
and product description and other data to provide storage space
  - Power-on reset circuit chip - chip voltage regulator 3.3V output USB function controller
  - Full compliance with USB Specification 2.0 (12 Mbps)
  - By SUSPEND and RI pin support USB suspend state

Asynchronous serial data bus (UART):
  - All handshaking and modem interface signals
  - Data formats supported:
   • 8 data bits
   • Stop bits 1, 2
   • Parity: Odd parity, even parity , no parity
  - Baud rate 300bps to 921.6kbps
  -512 512 byte receive buffer byte transmit buffer
  - Support for hardware handshaking or X-On/X-Off
  - Support event status and line termination conditions

Practical COM port device driver device :
  - Can the existing COM port PC applications with the use of
  - The issue of freedom of copyright licensing
  -Windows 98/Me/2000/XP
  -MAC OS-9
  -MAC OS
  -X-Windows CE
  -Linux 2.40 or later

Application examples :
  RS-232 to USB upgrade traditional devices
    - Mobile USB interface cable
    -PDA USB interface cable
    -USB to RS-232 serial adapter

Power supply voltage :
  - Self-powered : 3.0V to 3.6V
  -USB bus-powered : 4.0V to 5.25V