XBEE S2C ZIGBEE (WIRE ANTENNA)

XBEE S2C ZIGBEE (WIRE ANTENNA)
 

This is the XBee S2CTH ZigBee module with wire antenna. It improves on the transmit power and data protocol which allows you to create complex mesh networks based on the XBee ZB ZigBee mesh firmware. These modules allow a very reliable and simple communication between microcontrollers, computers, systems, really anything with a serial port! Point to point and multi-point networks are supported.

The XBee S2C module has a uniform pin map with other XBee modules, which means you can plug it on the standard Arduino XBee shield, like DFRobot Gravity IO Expansion Shield. It is very convenient for the user to design their own devices.

Feature
Interoperable with other ZigBee compliant devices*
Supports binding and multicasting, for easy integration into a Home Automation platform
Through-Hole and Surface Mount form factors enable flexible design options
15 general-purpose I/O lines
Link budgets of 110 dB for XBee
Industry leading sleep current of sub 1uA
Firmware upgrades via UART, SPI or over the air

Specification
Data Rate: RF 250 Kbps, Serial up to 1 Mbps
Indoor/Urban Range: 200ft (60m)
Outdoor/RF Line-of-Sight Range: 4000ft (1200m)
Transmit Power: 3.1mW
Receiver Sensitivity: -100dBm
Serial Data Interface: UART, SPI
Configuration Method: API or AT command, local or over-the-air
Frequency Band: ISM 2.4GHz
Form Factor: Through-Hole, Surface Mount
Interference Immunity: DSSS (Direct Sequence Spread Spectrum)
ADC Inputs: (4) 10-bit ADC inputs
Digital I/O: 15
Antenna: Integrated Wire
Operating Temperature: -40o C to +85o C
Dimensions (L x W x H) and Weight: 0.960 x 1.087 in (2.438 x 2.761 cm)