POLOLU 3.3V 1A STEP-DOWN VOLTAGE REGULATOR D24V10F3
POLOLU 3.3V 1A STEP-DOWN VOLTAGE REGULATOR D24V10F3
The D24V10Fx family of step-down voltage regulators features the Intersil ISL85410 1A synchronous buck regulator and generates lower output voltages from input voltages as high as 36 V. They are switching regulators (also called switched-mode power supplies (SMPS) or DC-to-DC converters) with typical efficiencies between 80% and 95%, which is much more efficient than linear voltage regulators, especially when the difference between the input and output voltage is large. These regulators have a power-save mode that activates at light loads and a low quiescent (no load) current draw, which make them well suited for applications that are run from a battery.
The SHDN pin can be used to put the board in a low-power state that reduces the quiescent current to approximately 10 µA to 20 µA per volt on VIN, and a PG (power good) output can be used to monitor the state of the regulator’s output voltage.
The regulators feature short-circuit/over-current protection, and thermal shutdown helps prevent damage from overheating. The boards do not have reverse-voltage protection.
Dimensions
Size: 0.5″ × 0.7″ × 0.14″
Weight: 1.0 g
General specifications
Minimum operating voltage: 3.4 V
Maximum operating voltage: 36 V
Maximum output current: 1 A
Output voltage: 3.3 V
Reverse voltage protection?: N
Maximum quiescent current: 0.2 mA
Tags: POLOLU 3.3V 1A STEP-DOWN VOLTAGE REGULATOR D24V10F3